Daily Papers

Diffusion-based large language models (dLLMs) promise to break the sequential latency bottleneck of autoregressive agents through parallel decoding, but recent evaluations show this efficiency does not transfer to embodied agentic competence: dLLM-backed agents repeatedly fall into retry loops, re-issuing an action long after it has failed. We give a mechanistic account of this failure and a training-free remedy. We trace the retry loop to the adaptivity of masked decoding: the sampler commits the positions it is most confident about and defers the uncertain ones, and at a failure state the context already offers a confident fill for the deferred decision, i.e. the failed action itself, so the retry is committed without the failure feedback ever being confronted. We model the resulting distortion of the action distribution as a task-blind corruption: contextually salient actions (e.g., the action just taken) receive inflated probability by a factor that depends on the state and the action but not on the task. Under this model, we analyse an invariance proposition: the task-blind factor cancels exactly from the reverse conditional, i.e. the likelihood of the task given the state and a candidate action, which coincides with the task posterior of an idealized uncorrupted model. Masked dLLMs evaluate the reverse conditional natively, unlike autoregressive models, by masking the task tokens and denoising, at the cost of a few parallel passes per candidate. We instantiate the rule as Reflect Reverse and evaluate it on four multi-turn embodied benchmarks, where it improves task success and progression rates over forward-scoring baselines.

Indoor navigation remains a critical accessibility challenge for the blind and low-vision (BLV) individuals, as existing solutions rely on costly per-building infrastructure. We present an agentic framework that converts a single floor plan image into a structured, retrievable knowledge base to generate safe, accessible navigation instructions with lightweight infrastructure. The system has two phases: a multi-agent module that parses the floor plan into a spatial knowledge graph through a self-correcting pipeline with iterative retry loops and corrective feedback; and a Path Planner that generates accessible navigation instructions, with a Safety Evaluator agent assessing potential hazards along each route. We evaluate the system on the real-world UMBC Math and Psychology building (floors MP-1 and MP-3) and on the CVC-FP benchmark. On MP-1, we achieve success rates of 92.31%, 76.92%, and 61.54% for short, medium, and long routes, outperforming the strongest single-call baseline (Claude 3.7 Sonnet) at 84.62%, 69.23%, and 53.85%. On MP-3, we reach 76.92%, 61.54%, and 38.46%, compared to the best baseline at 61.54%, 46.15%, and 23.08%. These results show consistent gains over single-call LLM baselines and demonstrate that our workflow is a scalable solution for accessible indoor navigation for BLV individuals.

Language-model agents that run long tasks often redo work they have already done: they re-issue a tool call they made earlier and get back exactly the same observation, a step that adds no new information. We identify this failure as a loop. Loops appear natively in Qwen, Llama, and Gemini agents and become far more common once the agent's history is compressed to fit its context window. To reduce these loops, we propose DeLoop, a self-supervised training method. DeLoop builds on a simple observation: the agent's own rollout can provide the supervision needed to learn from its loops. We use a looping action as a negative example and the first later non-looping action in the same rollout as a positive example. DeLoop learns from these pairs through direct preference optimization and does not require task rewards, gold answers, or LLM judges. On CodeGym under compression, DeLoop reduces the share of Qwen3-8B tasks containing loops from 57.3% to 6.1%. It also uses about one third as many steps per task, with similar task success. On Qwen3-32B, DeLoop reduces loops and steps while raising task success from 37.7% to 44.8%.

Retrieval-Augmented Generation (RAG) improves Large Language Model (LLM) performance on knowledge-intensive tasks but depends heavily on initial search query quality. Current methods, often using Reinforcement Learning (RL), typically focus on query formulation or reasoning over results, without explicitly encouraging persistence after a failed search. We introduce ReZero (Retry-Zero), a novel RL framework that directly rewards the act of retrying a search query following an initial unsuccessful attempt. This incentivizes the LLM to explore alternative queries rather than prematurely halting. ReZero demonstrates significant improvement, achieving 46.88% accuracy compared to a 25% baseline. By rewarding persistence, ReZero enhances LLM robustness in complex information-seeking scenarios where initial queries may prove insufficient.

Turning a frontier vision-language model into a robot policy usually means fine-tuning it to emit an action representation it never saw in pretraining, which throws away much of the reasoning that made the model worth reaching for. We go the other way and keep the VLM frozen. It writes the policy as a short Python control function, with no demonstrations and no fine-tuning. Writing that code once is open-loop, though. Existing closed-loop methods react at the wrong level: they retry a fixed policy or pick a different subtask, but never rewrite the code that failed. VLCP closes the loop where the failure actually lives, on the control code, within a single episode. Every K steps the VLM re-observes the scene from multi-view RGB, proprioceptive state, and a state delta, then rewrites the control function from what it just saw, so a failure is caught before it compounds. We evaluate on a 57-task MuJoCo/RoboVerse sweep. This training-free policy reaches 35.1% pooled success, against 3.5% for the identical system queried once per episode. That tenfold gap holds with non-overlapping confidence intervals in every scene family. The gain traces to a 27.3% within-episode recovery rate on failed grasps: a miss an open-loop controller would carry to the end of the episode gets re-observed and fixed at the next replan. And the loop stays cheap. A median 84% of input tokens hit cache, an episode needs only about 10 compact queries, and control blocks written during any replan persist to a cross-episode skill library reused in later prompts.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Repeating a small block of middle layers increases a language model's effective inference depth without adding parameters or generating extra tokens, and recent work shows that this latent recurrence improves reasoning. However, two design choices limit these gains. Each iteration sees only the previous output and cannot directly access earlier computations. Moreover, a fixed loop count wastes depth on easy inputs while leaving hard ones with too little computation. We introduce RecurTrace, which addresses both limitations using the loop's own trajectory. Specifically, Loop Memory Attention lets each looped layer attend to its own states from previous iterations along the loop-time axis, so the model can revisit earlier computations instead of relying on the latest state alone. A halting head then reads the loop state and predicts whether to continue, with supervision from an oracle that identifies when additional depth still reduces loss. In a controlled MathQA comparison on the same looped backbone, RecurTrace achieves 56.9% accuracy with an average of 2.0 loops, exceeding the best fixed loop depth by 2.2 points at matched compute. By comparison, ACT and PonderNet collapse to one loop, and CALM reaches only 54.1% with 5.6 loops, while the stronger LoopUS-Conf and TaH-Mismatch baselines reach 55.3% at 3.2 loops and 55.7% at 2.1 loops. Finally, RecurTrace improves generation accuracy over same-budget fine-tuned baselines at 0.6B, 1.7B, 4B, and 8B, with the gain growing with model size from 0.6 to 3.4 points.

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

Large language model (LLM) agents have shown strong decision-making capabilities in long-horizon interactive tasks, yet they still struggle to effectively leverage failed trajectories: full retries incur high interaction costs, while experience retrieval tends to dilute critical experience signals. To address this, we propose PivoARL, a self-feedback retry framework for experience exploitation in LLM agents. PivoARL identifies the pivotal erroneous turn through structured reflection and performs local retry only from the corresponding pivotal state, thereby reusing the correct prefix and reducing redundant interactions. From an information-gain perspective, we further show that pivotal retry concentrates useful experience signals near the error boundary, mitigating the signal dilution caused by state-agnostic experience utilization. Based on this insight, we design a pivotal-aware credit assignment mechanism that rewards correct prefixes while isolating erroneous suffixes, and optimize reflection quality through implicit reflection returns. We conduct a systematic evaluation on 4 agent tasks and 7 search-based QA benchmarks. Results show that PivoARL achieves significant improvements on Pass@2/3 across all tasks, with an average gain of about 11.5\% over MetaRL. Moreover, benefiting from contrastive preference signals induced by pivotal turns, PivoARL also consistently improves Pass@1 on over 80\% of the tasks. On Minesweeper environment, PivoARL improves over GiGPO by more than 45\% and reduces interaction turns by about 42\% on average compared with full-retry methods. Code is available at https://github.com/yuki-younai/PivoARL.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

In this paper, we argue that looped Transformers need their own residual connections to prevent performance degradation as the number of iterations grows. We observe that increasing loop iterations can reduce reasoning accuracy: noisy state updates overwrite correct intermediate deductions and even undo completed solutions. This leaves subsequent iterations to recover lost information from an already degraded representation: once an error arises in an earlier loop, often as a result of long-range propagation through the recurrence, later loops find it difficult to correct. In this paper, we introduce InfiLoop, a loop-native residual connection that learns which past computations to retain and how much to accept from each new update. InfiLoop combines content-based weighting with learned temporal decay to maintain a running summary of recurrent states. An exact streaming recurrence keeps its persistent aggregation memory constant as the loop count grows. The resulting adaptive update suppresses unreliable proposals and preserves useful intermediate states. Across extensive reasoning tasks, a 7M-parameter InfiLoop model outperforms existing recursive architectures, reaching 97.9% exact accuracy on Sudoku-Extreme, and 13.6% pass@2 on ARC-AGI-2. Notably, on Sudoku-Extreme, InfiLoop continues to improve with test-time looping beyond 20,000 effective steps, showing that added depth translates directly into stronger reasoning. Our code is available at https://github.com/pixeli99/InfiLoop.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

False retry permission (FRP) occurs when an agent retries a timed-out tool call without support from the visible contract. RetryBench separates this error from realized recovery. Successful protected recovery does not imply reliable rejection of unsupported retries. In a 720-response key control, valid keys usually enabled safe progress, but offered changed keys elicited unsupported retries in Sol (1/80), Terra (55/80), and Luna (60/80). A later 240-response control removed the candidate and required models to supply a key. Luna still made 8/80 unsupported dispatches; Sol and Terra made none in 80 responses each. Accepting a displayed bad key therefore cannot explain all observed errors, although changed output requirements and conditions preclude a pure display-effect comparison. Removing the weak-contract label increased retries in Sol and Terra's coded-action conditions in a six-endpoint study. A separate 1,536-response canonical-action block also found a positive Terra contrast (115/128 versus 124/128 retries), concentrated in two task/order conditions; the other five contrasts remained unresolved after multiplicity correction. An explicit-contract cue control elicited deferral in all 762 returned responses, leaving recovery unresolved. These results support reporting permission and recovery together across declared interface variants. The evidence covers four purposive tasks, fixed GPT endpoints, and one recovery decision; it identifies neither internal mechanisms nor episode-level safety.

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

Large language model (LLM) agents are increasingly used for multi-step, stateful tool-use tasks, yet production reliability remains limited. Unlike static software repair, agent repair must recover dynamic trajectories whose early decisions can propagate into later errors and external state changes. Existing automatic remedies address only part of this problem: blind retry adds no diagnosis, outcome feedback says whether a run failed but not where or why, and self-reflection often lacks grounded evidence to prevent the same failure from recurring. We present AgentTether, a run-time repair framework that automates post-run diagnosis and guided recovery without modifying the underlying agent or environment. AgentTether abstracts each run into Transition Units, links them through a dependency-aware Critical Transition Graph, and localizes failure-critical subtrajectories by combining an offline normal-behavior model with a run-local graph detector. It then converts the localized cause into behavior-scoped guidance backed by cross-iteration Repair Memory, and can optionally apply guarded run-time intervention to keep the correction active during re-execution. The same design can be deployed as an offline diagnostic-and-guidance tool or as an online repair layer. We evaluate AgentTether on 261 tau-bench tasks across three domains with Qwen3.7-max, and test cross-model transfer on Banking with GPT-5.4. On the hardest Banking domain, AgentTether repairs 59.04% (49/83) of initially failed Qwen3.7-max tasks and 65.12% (56/86) of initially failed GPT-5.4 tasks. Overall, AgentTether improves repair effectiveness while reducing agent turns and end-to-end approach tokens, suggesting a practical reliability layer that can wrap existing agent deployments, reduce wasted re-execution, and improve recovery without retraining the agent.

Terminal agents have shown strong abilities in complex coding tasks. However, they often struggle to recover from errors during long-running execution (e.g., command errors, faulty implementations), eventually leading to task failures. To this end, we present ReTerm, a self-improving terminal agent trained by learning how to recover from its own failed terminal tasks. To support its training, we construct a customized data pipeline and produce ReTerm-10K, a high-quality dataset that provides effective recovery demonstrations for SFT cold start. Furthermore, we propose ReTerm-GRPO, an online RL algorithm that forks from the agent's own failure states to generate multiple independent self-recovery attempts. By learning from whether these attempts successfully complete the task, the agent self-improves through its own recovery experience. Built on Qwen3.5-9B, our ReTerm-9B achieves 34.8% Pass@1 on Terminal-Bench 2.0, improving over the base model by 14.6 points. Further analysis shows that our method achieves consistently higher recovery rates across diverse error categories compared with standard GRPO training. All code, data and model are released at https://github.com/twothsnd/ReTerm.

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

We introduce training-free looped transformers, in which a lightweight inference-time wrapper loops a contiguous mid-stack block of layers of a frozen checkpoint without additional fine-tuning, continued training, or architectural changes. Unlike prior looped transformer methods that train with the looped structure end-to-end, we retrofit recurrence onto pretrained models at test time. We show that naive block reapplication usually degrades performance, highlighting the importance of the loop application strategy. Motivated by viewing a pre-norm transformer block as a forward Euler step on an ODE, we instead treat looping as a refinement of the same approximation, replacing one large update with smaller damped sub-steps. Across seven dense, sparse MoE, and MLA+MoE model families, our method improves Qwen3-4B-Instruct by +2.64 pp on MMLU-Pro, Qwen3-30B-A3B-Instruct by +1.14 pp on CommonsenseQA, and Moonlight-16B-A3B-Instruct by +1.20 pp on OpenBookQA.

Prompt optimization methods either analyze individual failures in isolation or compare prompt variants across examples, operating on single execution traces with no access to the reasoning process distinguishing success from failure on the same input. We introduce ContraPrompt, built on the observation that when a model fails but succeeds on a retry with feedback, the difference between its two chain-of-thought traces constitutes an optimization signal not captured by prior methods. Unlike prior contrastive methods, we compare complete intermediate reasoning processes: the two traces share model, input, and base prompt, so remaining differences reflect reasoning strategy and appended error feedback -- we call this dyadic reasoning trace analysis. The multi-attempt solving phase is an instrumented agentic retry loop that generates contrastive data automatically without human annotation. Extracted rules are organized into an input-aware decision tree routing instructions by observable input characteristics. On four reasoning and compliance benchmarks, ContraPrompt outperforms GEPA (Agrawal et al., 2026) on all four, with absolute gains of +8.29 pp on HotPotQA (+20.8% rel.), +2.21 pp on GDPR-Bench (+18.2% rel.), +7.14 pp on GPQA Diamond (+10.6% rel.), and +0.74 pp on BBH (+0.85% rel.). Ablations confirm dyadic trace contrastivity is the critical component, with a -16% relative average drop upon its removal. On 53 EvalSet black-box optimization problems, ContraPrompt beats GEPA on 11, ties on 41, and loses on 1 at equal budget. On FiNER-139 financial named entity recognition (Loukas et al., 2022), ContraPrompt achieves +7.77 pp over the unoptimized baseline (+11.6% rel.) and +1.94 pp over GEPA (+2.66% rel.), with branch conditions aligning with standard US GAAP financial-instrument categories.

The continuous delivery of modern software requires the execution of many automated pipeline jobs. These jobs ensure the frequent release of new software versions while detecting code problems at an early stage. For TELUS, our industrial partner in the telecommunications field, reliable job execution is crucial to minimize wasted time and streamline Continuous Deployment (CD). In this context, flaky job failures are one of the main issues hindering CD. Prior studies proposed techniques based on machine learning to automate the detection of flaky jobs. While valuable, these solutions are insufficient to address the waste associated with the diagnosis of flaky failures, which remain largely unexplored due to the wide range of underlying causes. This study examines 4,511 flaky job failures at TELUS to identify the different categories of flaky failures that we prioritize based on Recency, Frequency, and Monetary (RFM) measures. We identified 46 flaky failure categories that we analyzed using clustering and RFM measures to determine 14 priority categories for future automated diagnosis and repair research. Our findings also provide valuable insights into the evolution and impact of these categories. The identification and prioritization of flaky failure categories using RFM analysis introduce a novel approach that can be used in other contexts.

Tool-using LLM agents are mostly evaluated assuming all tools work. When a tool times out, returns a week-stale value, or has its description poisoned in deployment, the developer needs a controlled way to reproduce the failure, test a fix, and confirm the fix worked before deployment. We present AgentCheck, an open-source web workbench that turns an MCP server into an intervention surface. AgentCheck runs an agent against its real tools and records every tool response, then re-runs the agent with the response perturbed by a fault (12 types) injector. Matching tool calls are replayed from cache, and later tool calls go live after the agent diverges. This yields a reproduce-intervene-confirm loop: the developer toggles a mitigation, re-runs against the identical fault, and sees if the failure goes away. Scoring has two parts: deterministic pass/fail rules, plus an LLM judge for interpretive labels, validated against human annotations. Across five agents, the best passes 105/120 scenarios and the weakest only 77. The failures are usually silent, confident use of incorrect tool outputs rather than crashes. On the weakest agent, a retry mitigation raises success on timeout error faults from as few as 30% of cases to 100%, whereas stale-data faults remain near 3-4 of 10 regardless of the mitigation. AgentCheck makes these failure modes reproducible, comparable, and verifiable before deployment.

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

Looped language models (LoopLMs) increase computational depth through parameter sharing, offering a path to scale inference computation without adding parameters. However, it remains unclear when additional recurrence is beneficial and how architectural choices affect its effectiveness. Through controlled experiments, we systematically examine (1) when recurrence helps, (2) where it should be applied, and (3) how its conditioning affects performance. Our evaluation covers inference budgets below, within, and beyond the training horizon under knowledge and reasoning tasks. (1) We find that recurrence can improve reasoning beyond the training horizon while degrading knowledge performance, but harder reasoning instances do not consistently benefit more. (2) Performance also depends on how distinct layers and recurrent iterations are allocated, showing that effective depth alone is insufficient to predict behavior. Non-recurrent output layers improve robustness to under-unrolling, while the preferred placement of input and output layers varies with inference budget. (3) Finally, we find that conventional initial-state injection offers limited robustness to varying recurrence depth. We therefore propose history-state injection as an alternative, and show that channel-wise history-state injection combined with timestep conditioning offers a low-cost and more effective design, better preserving knowledge under extended unrolling while improving robustness across inference budgets. Overall, our results clarify when recurrent computation helps, where it fails, and offer practical guidelines for designing LoopLMs across variable inference budgets.

Current work on robot failure detection and correction typically operates in a post hoc manner, analyzing errors and applying corrections only after failures occur. This work introduces CycleVLA, a system that equips Vision-Language-Action models (VLAs) with proactive self-correction, the capability to anticipate incipient failures and recover before they fully manifest during execution. CycleVLA achieves this by integrating a progress-aware VLA that flags critical subtask transition points where failures most frequently occur, a VLM-based failure predictor and planner that triggers subtask backtracking upon predicted failure, and a test-time scaling strategy based on Minimum Bayes Risk (MBR) decoding to improve retry success after backtracking. Extensive experiments on the LIBERO and LIBERO-Plus simulation benchmarks show that CycleVLA surpasses the state-of-the-art VLA π0.5, improves success rates by correcting execution failures across VLAs of varying capability, from under-trained ones to fully converged policies, and that MBR serves as an effective zero-shot test-time scaling strategy for VLAs. On a real robot, CycleVLA reaches a 91% average success rate on one precise and two long-horizon manipulation tasks. We further conduct stress tests with multiple manually injected perturbations (e.g., swapping in a distractor at the expected location while relocating the true target object mid-execution), where CycleVLA corrects ~80% of injected failures and maintains success rates comparable to unperturbed execution. Project Page: https://dannymcy.github.io/cyclevla/

Self-improving AI agents are designed to learn from their mistakes. We show they can also hallucinate mistakes that never happened. We study this failure mode in automated harness optimization, where an LLM-based proposer edits an agent's scaffold, including prompts, parsers, filters, validators and guardrails, to eliminate observed failures. But this process rarely asks first: was there a real failure to fix? We introduce the Counterfactual Fabrication Lab, a deterministic micro-lab where the correct action is known: do nothing. The lab plants a candidate guardrail for a failure class that provably never occurs, presents only legal episodes, and uses a byte-exact oracle to check every cited violation. The proposer behaves as expected on real violations and abstains on featureless legal input. Yet when the legal input contains a harmless pattern resembling a familiar game rule, it invents a failure: in 15/60 runs, versus 0/60 on featureless input, it enables the nonexistent-rule guardrail and cites a violation the oracle refutes. The effect is structured, not indiscriminate. In single-shot proposals it appears only when three conditions coincide: a rule-shaped pattern, an open-ended rule set and an instruction that presupposes failures. Removing any of these conditions eliminates the fabrication. Because the invented guardrail changes no true outcome and cannot improve an already-perfect suppression score, the phenomenon is neither reward hacking nor over-refusal. It is a phantom guardrail: a fix for a failure that never happened, invisible to suppression-only acceptance. Inside an add-only accept loop it re-enters even without the failure-presupposing instruction, the loop's keep-adding role supplying the demand the instruction supplied in single shot, and once in it stays. We present the Counterfactual Fabrication Lab for measuring fabricated failures in self-improving agent harnesses.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

When a professional web developer's code fails a test, they do not simply re-read the stack trace. They open the application in a browser, click buttons, inspect computed styles, and run diagnostic commands to understand what went wrong. Existing feedback mechanisms for coding agents rely on screenshots, LLM-as-a-judge scoring, or natural-language corrections, but few interact with the live application the way a developer would. We introduce WatchPoint, a simulated-user system that mimics real developer behavior by generating and executing diagnostic scripts against the running application, producing structured observations that guide the coding model's retry. Unlike prior approaches that target single-file edits or evaluate using non-executable metrics, we operate on Web-Bench, a benchmark of 50 multi-file web projects comprising 1,000 sequentially dependent tasks, verified by deterministic end-to-end tests. WatchPoint recovers 57.6% of the tasks it diagnoses, and a controlled user study confirms the simulation's realism: human testers achieve a comparable recovery rate (54.5%), providing evidence that automated diagnostic scripts can substitute for interactive human testing on sequential web development tasks. We further identify a pattern of capability gaps that governs when simulated-user feedback is helpful and when it should be withheld.

Reinforcement learning drives recent advances in LLM reasoning and agentic capabilities, yet current approaches struggle with both exploration and exploitation. Exploration suffers from low success rates on difficult tasks and high costs of repeated rollouts from scratch. Exploitation suffers from coarse credit assignment and training instability: Trajectory-level rewards penalize valid prefixes for later errors, and failure-dominated groups overwhelm the few positive signals, leaving optimization without constructive direction. To this end, we propose R^3L, Reflect-then-Retry Reinforcement Learning with Language-Guided Exploration, Pivotal Credit, and Positive Amplification. To synthesize high-quality trajectories, R^3L shifts from stochastic sampling to active synthesis via reflect-then-retry, leveraging language feedback to diagnose errors, transform failed attempts into successful ones, and reduce rollout costs by restarting from identified failure points. With errors diagnosed and localized, Pivotal Credit Assignment updates only the diverging suffix where contrastive signals exist, excluding the shared prefix from gradient update. Since failures dominate on difficult tasks and reflect-then-retry produces off-policy data, risking training instability, Positive Amplification upweights successful trajectories to ensure positive signals guide the optimization process. Experiments on agentic and reasoning tasks demonstrate 5\% to 52\% relative improvements over baselines while maintaining training stability. Our code is released at https://github.com/shiweijiezero/R3L.

Recent advances in large (vision) language models have enabled computer-use agents that automate digital workflows via fine-grained keyboard and mouse operations. However, such agents remain fragile in long-horizon settings, where errors accumulate and executed actions leave unintended side effects, making the ability to recover from failures critical. Yet, existing remedies remain inadequate: environment resets are infeasible in proprietary settings, action replay is prohibitively expensive over long horizons, and API-based rollback is limited to web environments, leaving model-based recovery largely unexplored. To address this gap, we present ReTrace, a scalable evaluation framework for systematically studying recovery behavior in computer-use agents. We formalize Transition-Consistent Recovery: identical downstream actions from the recovered and target states must yield identical outcomes. We operationalize this criterion through goal-oriented action replay following controlled error injection. Using ReTrace, we present the first systematic study of autonomous, model-based recovery, revealing that (i) ideal recovery can unlock model's latent task completion capabilities, (ii) current computer-use agents fail to exploit their latent recovery capabilities, and (iii) accurate model-based recovery yields measurable end-to-end gains. Together, these findings establish recovery as a fundamental capability for building reliable computer-use agents. Our code and dataset is available at https://github.com/BangProx/ReTRACE.

Recursive reasoning models such as the Tiny Recursive Model (TRM) iteratively refine two latent states: an answer state y, decoded into the output, and a reasoning state z, which is never decoded. Many of their failures have been attributed to bad basins, regions of latent space that trap the recursion on wrong answers. Recent test-time approaches perturb y, z or both to recover these failures, but the impact of this choice on performance, test-time compute efficiency and scaling properties remains unclear. Through controlled experiments on TRM, we find that a failed trajectory carries its failure in its answer state. At equal compute, in depth and in width, resampling y recovers more failures than any perturbation of z we tested, and the performance gap widens as the test-time compute budget grows. Our approach, Gated Answer Resampling (GAR), pairs this resampling of the answer state with the model's own halting head and restarts only the puzzles that the head rejects. With at most 64 restarts per puzzle and no training or hyperparameter search, GAR takes TRM from 85.9% to 99.4% on Sudoku-Extreme and from 68.8% to 85.6% on Pencil Puzzle Bench validation. On the same checkpoints, GAR also outperforms Probabilistic TRM (PTRM), which perturbs z at each step, even when PTRM uses 42 to 197 times as much compute.

Successful trajectories on difficult tasks provide valuable supervision for model improvement, but specialized harnesses introduce interventions that may be unavailable during deployment. We propose Recursive Self-Rewrite (RSR), a framework that uses one base model, Qwen-3.8-27B, to discover successful solutions under diverse harnesses and reconstruct them as training trajectories under a general harness. A planner extracts procedures into runbooks, a critic screens for verifier and solution leakage and guides recursive revision, and an executor follows qualified runbooks in fresh sandboxes. Across approximately 3K self-curated terminal tasks, three harnesses jointly solve 759 tasks, 34.3% more than the strongest individual harness in the recorded pool. RSR expands 2,001 successful source trajectories into 11,094 rewritten trajectories for supervised finetuning. Training on these trajectories outperforms both the base model and direct trajectory SFT. Compared with the base model, pass@3 increases from 57.0% to 74.2% on Terminal-Bench 2, from 1.5% to 9.1% on Terminal-Bench 4, from 39.0% to 63.0% on our self-curated Terminal-Bench Hard, and from 3.0% to 6.0% on our Software Terminal-Bench. Process reward on Long-Horizon Terminal-Bench rises from 0.21 to 0.29. These results show how diverse harness-assisted experiences can be reconstructed into reusable capabilities for a model operating under a general harness.

LLM agents increasingly rely on iterative execution to solve tasks through planning, tool use, state updates, and agent collaboration. While this design enables flexible automation, it also creates a new class of failures: an agent may repeatedly execute model calls, tools, workflow transitions, or agent handoffs when the feedback path is not effectively bounded. We call this problem Infinite Agentic Loops (IALs). IALs are not ordinary programming loops; they arise from the interaction between agent logic, framework semantics, runtime observations, and termination mechanisms. Such failures can amplify a single request into long running model and tool execution, causing cost exhaustion, model denial of service, context growth, and repeated external side effects. We propose IAL-Scan, a static analysis tool for detecting IAL failures in real-world LLM agent projects. IAL-Scan abstracts heterogeneous agent code into a framework independent Agent IR, builds an Agentic Loop Dependence Graph (ALDG) to recover explicit and framework induced feedback paths, and checks whether these paths can repeatedly reach costly or state growing operations without an effective bound. We evaluate IAL-Scan on 6,549 LLM agent repositories. It reports 74 potential findings, among which manual review confirms 68 IAL failures across 47 projects, achieving 91.9% precision.

Tool-using large language model agents frequently replan, retry failed operations, delegate tasks, and resume after crashes. These behaviors can cause one user authorization to be requested and executed multiple times under freshly issued token identifiers, even when each individual token is single-use. We call this failure semantic replay: exceeding the execution budget of a token-independent authorization instance rather than merely reusing an old token identifier. We show that identifier-local token consumption cannot prevent fresh reissuance unless the issuer retains monotonic durable state over the authorized action, confirmation event, and remaining execution budget. We introduce CapLease, an authorization-consumption layer that follows proposal- and authority-level defenses, binds an authenticated user confirmation to a canonical action, and enforces transactional Issue-Prepare-Commit transitions. Across LLM-agent replanning, retry, delegation, concurrency, confirmation-replay, and crash-recovery scenarios, identifier-local tokens permit fresh semantic reissuance, whereas CapLease and an equally stateful Server Ledger prevent duplicate admission and, with an idempotent sink, duplicate external effects. Our results identify durable authorization state, rather than token representation alone, as the systems requirement for replay-resistant agent execution.

Large language models (LLMs) can translate natural language into optimization code, but silent failures pose a critical risk: code that executes and returns solver-feasible solutions may encode semantically incorrect formulations, creating a feasibility-correctness gap of up to 90 percentage points on compositional problems. We introduce ReLoop, addressing silent failures from two complementary directions. Structured generation decomposes code production into a four-stage reasoning chain (understand, formalize, synthesize, verify) that mirrors expert modeling practice, with explicit variable-type reasoning and self-verification to prevent formulation errors at their source. Behavioral verification detects errors that survive generation by testing whether the formulation responds correctly to solver-based parameter perturbation, without requiring ground truth -- an external semantic signal that bypasses the self-consistency problem inherent in LLM-based code review. The two mechanisms are complementary: structured generation dominates on complex compositional problems, while behavioral verification becomes the largest single contributor on problems with localized formulation defects. Together with execution recovery via IIS-enhanced diagnostics, ReLoop raises correctness from 22.6% to 31.1% and execution from 72.1% to 100.0% on the strongest model, with consistent gains across five models spanning three paradigms (foundation, SFT, RL) and three benchmarks. We additionally release RetailOpt-190, 190 compositional retail optimization scenarios targeting the multi-constraint interactions where LLMs most frequently fail.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

A framework that persists execution state so a run can be interrupted, survive a crash, and continue must decide what a resume means for effects that already happened. Five widely deployed agent workflow frameworks answer differently, none exposes a machine-checkable contract, and measured behavior violates even the fragments they state. The RESUME CONTRACT states six properties over the persistence API (prefix continuation, effect exactly-once, fork determinism, checkpoint validity, consume-once, recovery determinism), plus fork-intent and liveness obligations. A TLA+ model checks a reference semantics exhaustively, unchanged at scaled bounds (7.4 million states), and the reference conjunction is additionally TLAPS-proved unbounded (196 obligations); a 39-cell fault matrix and two companion modules yield the separating models independence requires. A deterministic, LLM-free harness measures them at pinned releases. LangGraph 1.2.9 durably records a second resume value and never consults it, persists schema-invalid state silently, and re-executes durably recorded work after a real SIGKILL: exactly-once across interrupts, at-least-once across crashes, on one API. CrewAI 1.15.2 re-executes completed effect-bearing methods against its written claim; pydantic-graph 1.x cannot resume after a mid-node crash; no two probed frameworks share a conformance profile. Consume-once holds sequentially and fails under concurrent delivery: k processes resuming one parked interrupt fire the gated effect k times, saturation 1.0 in 36 of 40 cells, and the failure crosses hosts. REMIT, a reference sequencer whose Verus-verified recovery core is line-identical to the shipped executable, repairs the fork and validity cells. The cross-process cell is repaired at the read path: an opt-in gate claims consumption in the shared store, serving one racer and refusing the rest before any node executes.

While generalist vision-language-action (VLA) models have enabled diverse open-world manipulation, real-world robotic assistance requires two critical capabilities they currently lack: personalization and reliable execution. First, executing an instruction like "make me a sandwich" requires grounding subtask decomposition in persistent user preferences rather than relying on a single generic solution. Second, reliable deployment demands explainable safety assurance that proactively prevents hazards and gracefully recovers from occasional physical failures. To address these gaps, we present CarryOn, a dual-loop harness designed to augment a frozen VLA policy. The planning loop maintains persistent user-level and scene-level context that is continually grounded against new observations and revised through interaction, enabling personalized task selection and execution grounding across conversations and changing scenes. The execution loop actively supervises policy rollouts, shielding actions from predicted hazardous contact. When execution fails, the system invokes reusable control-based recovery skills that restore task progress and are refined through reflection on earlier failures. On a real robot and in simulation, CarryOn dispatches preference-consistent subtasks across users and scenes, reduces the violation rate of an already safety-finetuned VLA from 52.6% to 6.1%, and increases recovery success from 13% to 80% when refined skills are reused.

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

Existing guardrail systems for large language model agents operate as binary classifiers that block unsafe content, leaving organizations to discard failing outputs and retry from scratch. We introduce RAIL Guard, a closed-loop responsible AI pipeline that evaluates LLM outputs across eight measurable dimensions and iteratively remediates failing outputs through an evaluate-rewrite-reevaluate loop. We evaluate the pipeline across three experiments on four frontier LLMs and 4,276 content outputs plus 6,400 agent tool-call scenarios. Closed-loop remediation achieves 96.9% convergence versus 49.1% for block-and-retry, though the highest-convergence method reduces utility by 22.3%; feedback-driven self-repair achieves 86.6% convergence on fixable dimensions with no significant utility loss (p = 0.177). Pre-tool-call evaluation reduces unsafe agent executions by 33% (p = 0.007) with zero impact on task completion. We identify a key distinction between fixable dimensions that respond to remediation and structural dimensions (Transparency at 93.0%, Accountability at 92.8%, and Inclusivity at 82.5% failure) that require architectural rather than algorithmic solutions. The system is available as open-source SDKs.

Computer-use agents (CUAs) interact with graphical interfaces through screenshots and low-level mouse and keyboard actions, yet the causal error may precede the terminal failure. We present CUADebug, a framework for localizing root causes in CUA trajectories and guiding re-execution. CUADebug includes a five-category, 30-subtype taxonomy; CUAErrorBench, a benchmark of 204 failed OSWorld trajectories with human root-cause annotations; and CUADebugger, a ReAct-style agent for root-cause analysis (RCA). CUADebugger iteratively selects trajectory steps, inspects paired before/after screenshots and action traces, and submits a structured diagnosis containing the causal step, taxonomy label, grounded evidence, and correction. CUADebugger performs RCA without per-trajectory human intervention; human annotations are used to evaluate RCA predictions and, in controlled re-rollout comparisons, to fix restart points. Task reasoning and control is the largest annotated failure category (110/204). CUADebugger improves L2 and Tag+Step Exact across three debugger backbones on the Claude-agent split; with Gemini 2.5 Pro, Tag+Step Exact rises from 11.1% to 19.4%. Single re-execution improves failure recovery from 13.89% to 29.86% (overall 61.77% to 68.14%); controlled continual re-execution improves it from 12.50% to 25.69% (overall 61.22% to 66.48%). Project page: cuadebug.github.io.

Self-improving LLM agents can adapt a credit pipeline to a changed rule, but an agent that rewrites itself destroys the artefact a supervisor reviews: a named change, a recorded test, an approval. We argue that self-evolution is reviewable only if it is confined to the runtime harness (instruction text, tool-call logic and primitive composition) while model weights stay fixed, so that every adaptation is a diff with a cause and a test attached. We give a dual-loop engine built on that bound, with one admission gate that writes a hash-chained record before deployment, and we measure the gate in simulation, with a simulated agent and a seeded-search proposer rather than language models. Across three families of supervisory re-interpretation at three severities, 10 seeds each, the gated loop admitted 144 of 7,449 candidate changes, none of which worsened error on held-out history, and restored the false-positive rate to the oracle level without raising missed flags in every low- and mid-severity cell. With the gate replaced by the check an unbounded system applies (fewer errors visible in recent traces), the same loops admitted 309 harmful changes and left missed flags above 10% in 49 of 90 runs: false positives fell because the screen was loosened. Evaluated on pre-shift labels, the gate rejected every candidate, so a re-interpretation must be encoded as a rule that relabels history. Parametric and scope shifts were repaired locally, a structural one only by primitive replacement; at the highest structural severity the gate's fixed tolerance blocked the correct replacement in half the seeds. We map the mechanisms to the EU AI Act's provisions for high-risk credit scoring and note that the April 2026 US model-risk guidance excludes agentic AI from its scope.

Existing sequential recommenders usually allocate a fixed computational budget to every item in a user's interaction history, regardless of the item's contribution to the final prediction. We challenge this de facto design with two diagnostic findings. (1) Non-uniform computational need: items within the same sequence vary drastically in how much computation they require. Most converge after shallow processing while a critical minority only stabilizes at full depth. (2) Suboptimality of fixed allocation: given oracle access to the target item, a non-uniform depth assignment consistently outranks the fixed one, indicating that existing uniform computation both wastes capacity on already-converged items and sacrifices overall recommendation quality. These observations motivate a shift from fixed-depth computation to item-level adaptive reasoning. To this end, we propose LoopRec. LoopRec recursively applies a single weight-shared block and introduces a lightweight gate at each recursion boundary that makes a binary exit-or-continue decision for every item independently. Items whose representations have sufficiently matured exit early, while those requiring deeper reasoning continue to subsequent recursions. This design converts the fixed global depth into a learned, per-item property without auxiliary depth labels, and is readily adaptable to diverse backbone architectures. Extensive experiments on public benchmarks with four backbone families demonstrate that LoopRec consistently outperforms matched fixed-depth counterparts. Further analysis reveals that LoopRec's learned allocation exhibits interpretable patterns aligned with our post-hoc oracle analysis: lower-frequency items and more recent interactions naturally receive deeper computation. Our code is available at https://github.com/Elpmis117/LoopRec.

Generating high-quality code that solves complex programming tasks is challenging, especially with current decoder-based models that produce highly stochastic outputs. In code generation, even minor errors can easily break the entire solution. Leveraging multiple sampled solutions can significantly improve the overall output quality. One effective way to enhance code generation is by pairing a code generation model with a reranker model, which selects the best solution from the generated samples. We propose a novel iterative self-training approach for self-training reranker models using Proximal Policy Optimization (PPO), aimed at improving both reranking accuracy and the overall code generation process. Unlike traditional PPO approaches, where the focus is on optimizing a generative model with a reward model, our approach emphasizes the development of a robust reward/reranking model. This model improves the quality of generated code through reranking and addresses problems and errors that the reward model might overlook during PPO alignment with the reranker. Our method iteratively refines the training dataset by re-evaluating outputs, identifying high-scoring negative examples, and incorporating them into the training loop, that boosting model performance. Our evaluation on the MultiPL-E dataset demonstrates that our 13.4B parameter model outperforms a 33B model in code generation quality while being three times faster. Moreover, it achieves performance comparable to GPT-4 and surpasses it in one programming language.

Information retrieval systems are crucial for enabling effective access to large document collections. Recent approaches have leveraged Large Language Models (LLMs) to enhance retrieval performance through query augmentation, but often rely on expensive supervised learning or distillation techniques that require significant computational resources and hand-labeled data. We introduce DeepRetrieval, a reinforcement learning (RL) approach that trains LLMs for query generation through trial and error without supervised data (reference query). Using retrieval metrics as rewards, our system generates queries that maximize retrieval performance. DeepRetrieval outperforms leading methods on literature search with 65.07% (vs. previous SOTA 24.68%) recall for publication search and 63.18% (vs. previous SOTA 32.11%) recall for trial search using real-world search engines. DeepRetrieval also dominates in evidence-seeking retrieval, classic information retrieval and SQL database search. With only 3B parameters, it outperforms industry-leading models like GPT-4o and Claude-3.5-Sonnet on 11/13 datasets. These results demonstrate that our RL approach offers a more efficient and effective paradigm for information retrieval. Our data and code are available at: https://github.com/pat-jj/DeepRetrieval.

Looped language models (LoopLMs) improve parameter efficiency by recursively reusing Transformer blocks, enabling deeper computation under a fixed model size. However, this reuse makes LoopLMs more fragile under post-training quantization (PTQ). We present the first systematic study of quantization in LoopLMs and identify three challenges: distribution shift across roles, state reuse across loop transitions, and recursive error accumulation. To address these challenges, we propose LoopQ, a loop-aware PTQ framework that preserves a shared quantized backbone while introducing lightweight adaptations. LoopQ combines activation scaling, selective transformation, cross-loop state alignment, and trajectory-aware optimization to reduce distributional mismatch within loops and error accumulation across loops. Experiments across seven benchmarks show that, under W4A4 quantization, LoopQ improves average downstream accuracy by 68.8% and reduces average perplexity by 87.7% compared with the strongest static PTQ baseline.

Retrieval-augmented QA pipelines often route retrieved passages through an LLM rewriter before a smaller reader, lifting F1 by tens of points on multi-hop benchmarks; this gain is typically credited to improved evidence quality. We ask whether that lift is causally driven by the gold answer string appearing in the rewritten context rather than by curation per se, using a controlled intervention audit. For each rewritten context we re-run the reader after one of four controlled edits to the compile output: removing the gold answer span, replacing a length-matched random non-answer span (placebo), or injecting the gold into rewrites where it was absent (at the prefix or at a midpoint sentence boundary). Across twelve completed (cell, baseline) intervention runs spanning three reader families (Qwen2.5-7B, Qwen3.5-35B, GLM-4.7), two datasets (HotpotQA, 2WikiMultihopQA), and three compiler arrangements (MA-only, MB-only, MA+verify), removing the gold answer drops reader F1 by 28 to 64 points beyond the length-matched placebo on paired answer-in-compile strata, and prepending the gold into rewrites that lacked it raises F1 by +0.7 to +9.7 points in 10 of 12 (cell, baseline) combinations. A companion five-sentinel audit shows the conventional single-[MASK] probe is itself sentinel-fragile: on 2Wiki it reports a +4.12~F1 ``non-leakage residual'' that flips to -3.33 to -7.81~F1 under four alternative sentinels and fails an equivalence test for three of those four (1/4~pass). We do not propose a new rewriter or mitigation; we release the intervention runner and the sentinel panel so that other rewriter-gain claims can be tested against the same standard.

Looped language models can run more iterations at test time, but additional iterations need not help them solve longer problems. For sequential state tracking, final-answer supervision does not specify how far each iteration should advance, and repeated updates can change the scale of the recurrent state. We introduce Progress-Aligned Recurrence (PAR), which trains the prediction at iteration k to match the state after the first k operations and rescales recurrent states to their first-iteration norms. On swap-S_5, a Qwen2.5-0.5B model trained on at most 32 moves achieves 95.5\% mean full-state accuracy at 512 moves, or 16times the training length, compared with 55.7\% reported for RLT and 0.8\% for explicit chain of thought on the same backbone. Controlled S_5 ablations show that removing norm anchoring reduces the extrapolation factor from 16times to below 2.2times, and replacing progress-aligned targets with final-answer supervision reduces it to at most 8times. A learned completion readout selects when to answer without a supplied stopping depth. When intermediate labels are unavailable, prefix self-distillation induces the correspondence from shorter problem prefixes using only final answers. The gains apply across sequential state-tracking tasks, establishing the task structure required for depth extrapolation. These findings support training intermediate predictions and state scale together to make additional recurrent depth useful for longer problems.

Large language model agents increasingly operate in long-horizon environments where early mistakes can trigger cascading failures and trap agents in dead-end trajectories. Agents must therefore be able to proactively recover from such states and turn their exploratory experience into guidance for subsequent decisions. We introduce ReTRAIL, a framework that enables agents to rewind the environment to earlier states while preserving valid progress and carrying forward knowledge learned from abandoned exploration. The environment state moves backward while the agent's knowledge continues to move forward. ReTRAIL trains a shared policy with two complementary signals: State-Anchored GRPO compares alternative continuations from revisited states to improve execution, while a branch-advancement reward guides reflection through the progress of subsequent exploration. Experiments across four interactive benchmark MineSweeper, Sokoban, ALFWorld and ScienceWorld show that simply adding a rewind primitive provides limited benefit and can even degrade performance. In contrast, ReTRAIL enables agents to rewind from unproductive states and use insights from abandoned branches to guide subsequent exploration. These results demonstrate the value of coupling environment rewinding with experience reuse within an ongoing task for long-horizon task solving. The code is available at https://github.com/whi497/ReTRAIL.

State-space models (SSMs) maintain a fixed-size recurrent state, but reading and writing it at every decoding step can bottleneck hybrid models. This eager state management causes large state I/O with low arithmetic intensity, leaves speculative decoding no cheap rollback, and feeds state quantization error into subsequent recurrent updates. We introduce ReplaySSM, which unrolls the recurrence to represent the state as a checkpoint and a buffer of recent SSM inputs. This separates output computation from checkpoint updates. By updating the checkpoint periodically, ReplaySSM avoids state writes on most steps and roughly halves the dominant state memory traffic. Keeping recent inputs also makes speculative rollback a buffer-pointer operation and enables output-only verification without materializing intermediate states. The same separation allows a low-precision checkpoint to serve output computation on most steps while a higher-precision checkpoint serves recurrent updates, so rounding error in the low-precision copy never enters later updates. We implement ReplaySSM in vLLM for Mamba-2 and Gated DeltaNet. At serving batch size 256, it accelerates standard decoding by 1.20--1.47times over a tuned vLLM baseline across four hybrid models, and delivers about 1.8times the throughput of vLLM's speculative decoding on the two 120B-class models. Separate state precisions also reduce output KL divergence and downstream accuracy losses compared with a shared low-precision checkpoint.

Self-correction is particularly useful when a failure constrains the next repair. Coding agents benefit from this property because compilers, tests, and execution traces turn many failures into typed recovery signals, but broad language-agent tasks often expose only a coarse task failure. This creates a tension for generic recovery playbooks: they broaden the agent's context precisely when the system needs a narrower repair interface, mixing incompatible signals for invalid actions, missing procedures, and strict-format errors. Our insight is that development-set failures can recover part of the missing diagnostic substrate by deciding which recovery interventions are admissible before test-time correction. We propose DARC, a diagnosis-guided recovery harness that profiles task-family failure modes, prunes mismatched interventions from a shared recovery library, and freezes a verifier-selected success-cost policy for deployment. This causal order makes correction selective: the harness first determines what kind of failure can be repaired, then decides how much recovery evidence to spend. In ALFWorld, AppWorld, and XBRL Finance, the same protocol yields an action-validity harness, a procedural-recovery fallback, and a format-precision retrieval policy; in each evaluated setting it improves average task performance over base agents and broad playbooks while reducing environment steps or retrieval budget. Our experiments show that failures need not trigger uniformly more context: DARC turns self-correction from prompt expansion into recovery-interface design. DARC provides a practical route toward more reliable agents in domains where compiler-like feedback is absent: making failures actionable before making contexts larger.

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

Looped Language Models (LoopLMs) offer a parameter efficient approach to scaling reasoning by reusing shared parameters across recurrent computation steps. Despite their promise, effective post-training of LoopLMs remains challenging. Existing approaches either provide reward based supervision that is sparse or costly to extend across loops, or rely on external teachers or privileged information, leading to limited teacher availability or teacher-student context mismatch. To address these limitations, we introduce LoopOPD, a cross-loop on-policy distillation framework that uses additional recurrent computation within a LoopLM as its own source of supervision. LoopOPD uses a frozen terminal loop policy as a compute privileged teacher for an intermediate loop student on student generated rollouts, providing dense supervision without an external teacher or privileged information. We further propose Dynamic LoopOPD (D-LoopOPD), which continually refreshes the terminal loop teacher as the shared model parameters are updated, enabling recurrent self-improvement. We characterize how distillation updates propagate across loop depths and derive sufficient conditions under which a single update yields simultaneous local improvement at both loop depths. Experiments on Ouro-Thinking models show that LoopOPD improves mathematical reasoning, while D-LoopOPD yields further gains through dynamic teacher updates. Despite being trained only on mathematical data, the resulting models also improve on general reasoning and code generation benchmarks, demonstrating that recurrent computation can serve as an effective source of supervision for LoopLMs. Our code and model checkpoints will be released upon acceptance.

Training LLMs on decentralized and wimpy computation nodes, e.g., multiple on-spot instances, lowers the training cost and enables model democratization. The inevitable challenge here is the churn of nodes due to failures and the operator's scheduling policies, leading to losing a stage - a part of the model. The conventional approaches to recover from failures are to either use checkpointing, where periodically a copy of the entire model is sent to an additional storage, or redundant computation. These approaches yield significant communication and/or computation overhead even in non-failure cases and scale poorly in settings with large models. In this paper, we propose, CheckFree, an efficient recovery method where a failing stage is substituted by a weighted average of the closest neighboring stages. In contrast to the state of the art, CheckFree requires no additional computation or storage. However, because of the nature of averaging neighbouring stages, it can only recover failures of intermediate stages. We further extend our method to CheckFree+ with out-of-order pipeline execution to tolerate crashes of the first and last stages. Thanks to out-of-order pipelining, behaviour of those stages is mimicked by their neighboring ones, which allows CheckFree+ to recover them by simply copying the weights from the immediate neighbour. To be able to recover the (de)embedding layers, CheckFree+ copies those layers to the neighboring stages, which requires relatively small storage overhead. We extensively evaluate our method on LLaMa models of model sizes from 124M to 1.5B with varying failure frequencies. In the case of low and medium failure rates (5-10%), CheckFree and CheckFree+ outperform both checkpointing and redundant computation in terms of convergence in wall-clock time by over 12%. Both of our proposals can be run via our code available at: https://github.com/gensyn-ai/CheckFree.

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

LLM agents fail mid-episode -- they loop, cascade tool errors, drift off goal, fabricate results, or silently absorb corrupted content -- and the standard remedy, judging every step with a second LLM, costs more than the agent itself. We ask how much detection is achievable from observable step telemetry alone, using monitors costing microseconds per step and trained only on healthy runs. On 2,823 committed agent episodes across three frameworks, three local models (qwen2.5 7b/3b, llama3.1 8b) and a commercial API (gemini-2.5-flash), a one-class echo-state-network ensemble with CUSUM alarms detects 0.71 of failures at a 5% false-alarm budget (AUROC 0.872). Its advantage over a memoryless baseline is a monotone function of post-onset horizon (+0.09 at <=3 steps, +0.40 at >=9), predicting its own failure region out of sample on AFTraj-2K. Ranking transfers with no retraining to two corpora from other groups (AFTraj-2K 0.745, ATBench 0.779). Monitors carry two burdens: a per-deployment healthy null (they do not transfer -- AUROC 0.527 cold against 0.885 recalibrated) and a residual false-alarm rate. We add a layer carrying neither: deterministic verification, which recomputes a run's stated total from the tool results it actually received and confirms every required call was made. Head-to-head it catches 60% of failures (96% with the coverage check) at 0 of 63 false positives against the monitor's 54% at 17%, transfers unchanged to llama3.1:8b (110 of 110 at 0 of 10), and trips on 0 of 1825 healthy episodes. Detection is then closed into repair: each flagged run is rolled back and re-run live, recovering 45% of failures against a 16% resampling control (p=0.0005) and lifting task success from 52% to 73% for about one extra model call per run. The system runs at ~200 microseconds per step, three orders of magnitude below a judge call. Code, traces and results are released.

We present SuperCoder2.0, an advanced autonomous system designed to enhance software development through artificial intelligence. The system combines an AI-native development approach with intelligent agents to enable fully autonomous coding. Key focus areas include a retry mechanism with error output traceback, comprehensive code rewriting and replacement using Abstract Syntax Tree (ast) parsing to minimize linting issues, code embedding technique for retrieval-augmented generation, and a focus on localizing methods for problem-solving rather than identifying specific line numbers. The methodology employs a three-step hierarchical search space reduction approach for code base navigation and bug localization:utilizing Retrieval Augmented Generation (RAG) and a Repository File Level Map to identify candidate files, (2) narrowing down to the most relevant files using a File Level Schematic Map, and (3) extracting 'relevant locations' within these files. Code editing is performed through a two-part module comprising CodeGeneration and CodeEditing, which generates multiple solutions at different temperature values and replaces entire methods or classes to maintain code integrity. A feedback loop executes repository-level test cases to validate and refine solutions. Experiments conducted on the SWE-bench Lite dataset demonstrate SuperCoder2.0's effectiveness, achieving correct file localization in 84.33% of cases within the top 5 candidates and successfully resolving 34% of test instances. This performance places SuperCoder2.0 fourth globally on the SWE-bench leaderboard. The system's ability to handle diverse repositories and problem types highlights its potential as a versatile tool for autonomous software development. Future work will focus on refining the code editing process and exploring advanced embedding models for improved natural language to code mapping.

With the advent of large language models (LLMs) like GPT-3, a natural question is the extent to which these models can be utilized for source code optimization. This paper presents methodologically stringent case studies applied to well-known open source python libraries pillow and numpy. We find that contemporary LLM ChatGPT-4 (state September and October 2023) is surprisingly adept at optimizing energy and compute efficiency. However, this is only the case in interactive use, with a human expert in the loop. Aware of experimenter bias, we document our qualitative approach in detail, and provide transcript and source code. We start by providing a detailed description of our approach in conversing with the LLM to optimize the _getextrema function in the pillow library, and a quantitative evaluation of the performance improvement. To demonstrate qualitative replicability, we report further attempts on another locus in the pillow library, and one code locus in the numpy library, to demonstrate generalization within and beyond a library. In all attempts, the performance improvement is significant (factor up to 38). We have also not omitted reporting of failed attempts (there were none). We conclude that LLMs are a promising tool for code optimization in open source libraries, but that the human expert in the loop is essential for success. Nonetheless, we were surprised by how few iterations were required to achieve substantial performance improvements that were not obvious to the expert in the loop. We would like bring attention to the qualitative nature of this study, more robust quantitative studies would need to introduce a layer of selecting experts in a representative sample -- we invite the community to collaborate.

Large Language Models generate text autoregressively, but open-ended generation is prone to verbatim looping, in which models repeat spans already present in context. Standard defenses such as repetition, presence, and frequency penalties and n-gram blocking act on token recurrence rather than the sequential structure of a loop, and often suppress looping only at strengths that also degrade formatting or fluency. We propose Don't Repeat Yourself (DRY), a sampling-time logit adjustment that penalizes a candidate token only when generating it would extend the current suffix into an exact continuation of a span seen earlier in the context. Sequence breakers protect chat templates and formatting tokens. Across models from 1.5B to 120B parameters, nine prompt families, and a 600-pair human study, DRY reduces suffix-extension rate by 47% while improving lexical diversity. An intervention-matched placebo produces no comparable reduction, identifying suffix matching as the operative mechanism. On AWQ-quantized 70B and 120B models, DRY reduces loop rate by roughly half while preserving MT-Bench, MMLU, and GSM8K performance, whereas standard alternatives lose measurable ground. DRY has been adopted by popular open-source LLM inference frameworks including llama.cpp, ExLlamaV2, and text-generation-webui, highlighting its practical impact on text generation.

Autonomous agents increasingly perform bounded software tasks under an orchestrator that retries, resumes, and budgets them. The machinery such orchestrators reach for is the service mesh's: retry, timeout, and error-rate circuit breaking. We report a failure study of a production agentic software-delivery platform over 147 numbered incidents spanning 81 runs, each with a measured cost and, in most cases, a mutation proof reproducing the failure. All three assumptions those primitives rest on are violated in practice, and we quantify the consequences: a loop of fifty-four consecutive successful tool calls no error-rate breaker could see; a progress signal constant by construction, guaranteeing a false trip on the third repair round and driving one run from six of six components to three; twenty-one events accumulated across six invocations of one delegation, making a correct, idempotent component unwinnable; a misrouted failure that woke five components for a two-component fault, leaving three bystanders regressing working code; and twelve incidents in which the enforcement layer blocked correct work, the most expensive costing 107 agent turns and zero accepted writes. We find one cross-cutting cause and its dual. Identity adequacy: in five separate subsystems an identity that failed to discriminate produced a confident wrong answer, and two of them derived the corrective rule independently. Evidence adequacy: a reliability decision may be taken only on evidence capable of moving, attributable to what it measures, and deterministic under identical conditions. From the findings we derive seven reliability primitives whose enforcement unit is the delegation rather than the message, and specify the controlled evaluation the study motivates but does not constitute.

Seismic advances in generative AI algorithms for imagery, text, and other data types has led to the temptation to use synthetic data to train next-generation models. Repeating this process creates an autophagous (self-consuming) loop whose properties are poorly understood. We conduct a thorough analytical and empirical analysis using state-of-the-art generative image models of three families of autophagous loops that differ in how fixed or fresh real training data is available through the generations of training and in whether the samples from previous generation models have been biased to trade off data quality versus diversity. Our primary conclusion across all scenarios is that without enough fresh real data in each generation of an autophagous loop, future generative models are doomed to have their quality (precision) or diversity (recall) progressively decrease. We term this condition Model Autophagy Disorder (MAD), making analogy to mad cow disease.

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

Most programmers make mistakes when writing code. Some of these mistakes are small and require few edits to the original program -- a class of errors recently termed last mile mistakes. These errors break the flow for experienced developers and can stump novice programmers. Existing automated repair techniques targeting this class of errors are language-specific and do not easily carry over to new languages. Transferring symbolic approaches requires substantial engineering and neural approaches require data and retraining. We introduce RING, a multilingual repair engine powered by a large language model trained on code (LLMC) such as Codex. Such a multilingual engine enables a flipped model for programming assistance, one where the programmer writes code and the AI assistance suggests fixes, compared to traditional code suggestion technology. Taking inspiration from the way programmers manually fix bugs, we show that a prompt-based strategy that conceptualizes repair as localization, transformation, and candidate ranking, can successfully repair programs in multiple languages with minimal effort. We present the first results for such a multilingual repair engine by evaluating on 6 different languages and comparing performance to language-specific repair engines. We show that RING can outperform language-specific repair engines for three of these languages.

Pre-trained code language models have achieved promising performance in code generation and improved the programming efficiency of human developers. However, their self-refinement capability is typically overlooked by the existing evaluations of code LMs, which focus only on the accuracy of the one-time prediction. For the cases when code LMs fail to implement the correct program, developers actually find it hard to debug and fix the faulty prediction since it is not written by the developers themselves. Unfortunately, our study reveals that code LMs cannot efficiently self-refine their faulty generations as well. In this paper, we propose CYCLE framework, learning to self-refine the faulty generation according to the available feedback, such as the execution results reported by the test suites. We evaluate CYCLE on three popular code generation benchmarks, HumanEval, MBPP, and APPS. The results reveal that CYCLE successfully maintains, sometimes improves, the quality of one-time code generation, while significantly improving the self-refinement capability of code LMs. We implement four variants of CYCLE with varied numbers of parameters across 350M, 1B, 2B, and 3B, and the experiments show that CYCLE consistently boosts the code generation performance, by up to 63.5%, across benchmarks and varied model sizes. We also notice that CYCLE outperforms code LMs that have 3times more parameters in self-refinement.

In software development, bug report reproduction is a challenging task. This paper introduces ReBL, a novel feedback-driven approach that leverages GPT-4, a large-scale language model, to automatically reproduce Android bug reports. Unlike traditional methods, ReBL bypasses the use of Step to Reproduce (S2R) entities. Instead, it leverages the entire textual bug report and employs innovative prompts to enhance GPT's contextual reasoning. This approach is more flexible and context-aware than the traditional step-by-step entity matching approach, resulting in improved accuracy and effectiveness. In addition to handling crash reports, ReBL has the capability of handling non-crash bug reports. Our evaluation of 96 Android bug reports (73 crash and 23 non-crash) demonstrates that ReBL successfully reproduced 90.63% of these reports, averaging only 74.98 seconds per bug report. Additionally, ReBL outperformed three existing tools in both success rate and speed.

Solving problems through repeated attempts is a sequential modeling task: at each step, the solver receives feedback and decides how to revise their solutions. Predicting whether performance improves, plateaus, or regresses across attempts is central to understanding any iterative problem-solving process in both human learners and autonomous agents. Beyond outcomes, modeling what errors persist and how strategies shift across attempts provides deeper insight into the mechanics of sequential learning. Studying these dynamics requires observing many solvers as they attempt, receive feedback, and revise. Programming courses with automated grading provide this setting, as students iteratively submit code to test suites and receive feedback on every attempt. We therefore curate CodeInsight, a large-scale dataset of over 3 million submissions from 3,286 undergraduates across 2 introductory C++ courses in 2 academic years, with test-case-level outcomes, timestamps, and source code. On this dataset, we build a benchmark that evaluates models spanning parametric, sequential, and generative traditions under a shared calibration-and-scoring protocol, including a Recurrent State Space Model (RSSM) adapted to track solver characteristics through discrete latent variables and an LLM-based predictor that generates explicit solutions. The adapted RSSM achieves the strongest predictive accuracy on three of the four courses. The LLM predictor is less accurate but produces full submissions at each attempt, enabling direct analysis of failure modes. We find that the model's coding proficiency is inversely related to predictive performance in this setting, with the LLM better understood as a generative solver conditioned on context rather than a faithful predictor of solver behavior. We publicly release our code and the dataset on request to facilitate future research.

Large language models (LLMs) can suggest missing elements from items listed in a prompt, which can be used for list completion or recommendations based on users' history. However, their performance degrades when presented with too many items, as they start to suggest items already included in the input list. This occurs at around 100 items for mid-2024 flagship LLMs. We evaluate this phenomenon on both synthetic problems (e.g., finding missing numbers in a given range of shuffled integers) and realistic movie recommendation scenarios. We refer to this issue as attention overflow, as preventing repetition requires attending to all items simultaneously. Although iterative loops can mitigate this problem, their costs increase with the repetition rate, affecting the language models' ability to derive novelty from lengthy inputs.

In mid-2026 a slogan reorganized how practitioners talk about coding agents: stop prompting your agent, start designing the loop that prompts it. We take this claim seriously and give it a careful treatment. We call the object of the new practice the loop specification: a bounded, reusable artifact, made of a trigger, a goal, a verification step, a stopping rule and a memory, that a human hands to an agent harness (such as Claude Code or Codex) so the agent pursues a goal on its own, in place of step-by-step prompting. We distinguish this external loop specification from two things it is often confused with: an ordinary programming loop, and the internal perceive-act-observe cycle that the harness already provides as plumbing. We position loop engineering as a new layer in the progression from prompt to context to harness to loop, and we argue, against the stronger headlines, that it does not retire prompt engineering; loop and prompt are distinct tools with distinct uses. We offer four contributions: a definition and scope for the discipline; an anatomy and taxonomy of loop specifications organized around trigger, goal type, a five-level verification ladder, architecture, and named terminal states; a descriptive analysis of the Loop Library, a public corpus of fifty real loops that we code by hand; and a set of design principles and anti-patterns grounded in the scientific literature on self-correction, reward hacking and model-as-judge fragility. The corpus shows that practice has matured most where the discipline says it matters: seventy percent of loops verify in the autonomous zone of the ladder and seventy-four percent name their terminal states, while automated triggering and durable memory remain comparatively underdeveloped. We close with the limits the practice must respect, including the verification burden, comprehension debt and the risk of cognitive surrender.

Reasoning models (e.g., DeepSeek-R1) generate long chains of thought to solve harder problems, but they often loop, repeating the same text at low temperatures or with greedy decoding. We study why this happens and what role temperature plays. With open reasoning models, we find that looping is common at low temperature. Larger models tend to loop less, and distilled students loop significantly even when their teachers rarely do. This points to mismatches between the training distribution and the learned model, which we refer to as errors in learning, as a key cause. To understand how such errors cause loops, we introduce a synthetic graph reasoning task and demonstrate two mechanisms. First, risk aversion caused by hardness of learning: when the correct progress-making action is hard to learn but an easy cyclic action is available, the model puts relatively more probability on the cyclic action and gets stuck. Second, even when there is no hardness, Transformers show an inductive bias toward temporally correlated errors, so the same few actions keep being chosen and loops appear. Higher temperature reduces looping by promoting exploration, but it does not fix the errors in learning, so generations remain much longer than necessary at high temperature; in this sense, temperature is a stopgap rather than a holistic solution. We end with a discussion of training-time interventions aimed at directly reducing errors in learning.

Coding agent infrastructure is shifting from harness engineering toward loop engineering as coding agents are deployed for sustained long-horizon software development. Existing benchmarks often center on localized tasks or end-state outcomes, offering limited insight into sustained execution. We introduce LOOPSBENCH, a long-horizon benchmark for loop engineering in coding agent evaluation. Each task is a dependency DAG over separately testable development units with source-evidenced prerequisite edges. LOOPSBENCH comprises 112 tasks from authentic sources spanning 8 programming languages and 9 domains. Its flow-aware runtime releases tests along the ready frontier and retains completed nodes as regression obligations. We evaluate frontier coding agents paired with widely used loop implementations. The strongest configuration, Opus-4.7 with Claude Code and outer continuation, resolves 25.00% of tasks. Recorded plans recover only part of the source-recovered prerequisite DAG, and regression events remain visible across the evaluated loop profiles. We open source the benchmark data and code, including all tasks, more than 5,300 development units, and executable tests, at microsoft/Loopsbench.

One-shot Program-of-Thought (PoT) emits a Python program that prints a primitive-action plan; a single invalid action silently invalidates the trajectory. We introduce RePoT (Recoverable PoT): a deterministic verified replay that walks the plan through the environment to its first invalid transition, then one LLM call that resumes from the verified prefix. RePoT costs at most one extra LLM call on the ~14% of problems where PoT fails. RePoT beats PoT by +3 to +11pp across four closed-model configurations on PuzzleZoo-775 and peaks at 96.9% vs 86.3% on gpt-5.4-mini-medium; against the matched-budget PoT-retry baseline, RePoT wins decisively on Gemini (+3.8pp, 95% CI [+2.2,+5.4]), is within sampling noise on GPT-medium and Claude, and loses on GPT-mini -- a capability-scaling pattern we begin to address with Adaptive RePoT, a rule-based dispatcher that routes between suffix repair and a fresh PoT retry based on verified-prefix length (preliminary). We replicate on PlanBench Blocksworld (+1.1 to +11.4pp) and on four open-weights models (+3.3 to +20.0pp on three of four). On Derail-550, our controlled recovery benchmark, every condition with access to checkpoint information clears >=30% on GPT-medium and >=70% on Gemini, vs <=3.1% for error-only feedback -- showing that checkpoint information, not the specific verified-prefix tail, is the load-bearing recovery signal.

Automatic program repair (APR) is crucial to improve software reliability. Recently, neural machine translation (NMT) techniques have been used to fix software bugs automatically. While promising, these approaches have two major limitations. Their search space often does not contain the correct fix, and their search strategy ignores software knowledge such as strict code syntax. Due to these limitations, existing NMT-based techniques underperform the best template-based approaches. We propose CURE, a new NMT-based APR technique with three major novelties. First, CURE pre-trains a programming language (PL) model on a large software codebase to learn developer-like source code before the APR task. Second, CURE designs a new code-aware search strategy that finds more correct fixes by focusing on compilable patches and patches that are close in length to the buggy code. Finally, CURE uses a subword tokenization technique to generate a smaller search space that contains more correct fixes. Our evaluation on two widely-used benchmarks shows that CURE correctly fixes 57 Defects4J bugs and 26 QuixBugs bugs, outperforming all existing APR techniques on both benchmarks.

One of the main challenges developers face in the use of continuous integration (CI) and deployment pipelines is the occurrence of intermittent job failures, which result from unexpected non-deterministic issues (e.g., flaky tests or infrastructure problems) rather than regular code-related errors such as bugs. Prior studies developed machine learning (ML) models trained on large datasets of job logs to classify job failures as either intermittent or regular. As an alternative to costly manual labeling of large datasets, the state-of-the-art (SOTA) approach leveraged a heuristic based on non-deterministic job reruns. However, this method mislabels intermittent job failures as regular in contexts where rerunning suspicious job failures is not an explicit policy, and therefore limits the SOTA's performance in practice. In fact, our manual analysis of 2,125 job failures from 5 industrial and 1 open-source projects reveals that, on average, 32% of intermittent job failures are mislabeled as regular. To address these limitations, this paper introduces a novel approach to intermittent job failure detection using few-shot learning (FSL). Specifically, we fine-tune a small language model using a few number of manually labeled log examples to generate rich embeddings, which are then used to train an ML classifier. Our FSL-based approach achieves 70-88% F1-score with only 12 shots in all projects, outperforming the SOTA, which proved ineffective (34-52% F1-score) in 4 projects. Overall, this study underlines the importance of data quality over quantity and provides a more efficient and practical framework for the detection of intermittent job failures in organizations.

Embedding-based code retrieval is a core component of coding agents and retrieval-augmented code generation, where retrieving correct code matters more than retrieving lexically similar code. Existing code-retrieval benchmarks do not plant controlled, execution-verified single-edit variants of each query's canonical implementation in the search pool, leaving the question of whether embeddings can functionally discriminate correct from near-clone-but-incorrect code unanswered in a retrieval setting. Resolving this requires a benchmark whose search pool itself contains the relevant counterfactuals -- execution-verified buggy variants near-identical to each canonical -- so that a retriever's rank ordering can be directly tested for functional discrimination rather than topical or identity overlap. We introduce ExecRetrieval, 939 Python tasks each paired with one execution-verified canonical implementation and up to four execution-verified buggy distractors, each generated by a mechanical mutation making a single targeted edit, and evaluate 23 dense embedding configurations plus BM25 under provider-native invocation with paired McNemar tests and query-level bootstrap intervals. With near-clone counterfactuals in the pool, the top hosted system reaches exec@10 = 1.00 but only exec@1 = 0.331; rank-1 misses are paired buggy variants 91.5-99.4% of the time across the four leading systems, and the canonical scores below at least one of its four paired distractors in 67-78% of queries on the leading systems. The full dataset, execution oracle, embedding matrices, environment snapshot, and pairwise statistical tests are released at the URL in Appendix D.

Code models are increasingly trained with execution feedback, but most training signals still stop at correctness. This leaves an important gap for systems code: two programs can pass the same tests while differing greatly in runtime. We study how to train code agents to prefer faster correct implementations, rather than treating efficiency only as an evaluation metric. The key difficulty is that runtime is a fragile reward. It is meaningful only after a program is correct, varies across tasks, and gives little guidance when most sampled programs fail to compile or run. We propose RLPF, reinforcement learning from performance feedback, which turns execution outcomes into a staged reward. Failed programs are ordered by execution progress, while correct programs are ranked by their relative improvement from the baseline toward the expert reference. This gives useful feedback before correctness and performance-sensitive feedback after correctness. Fine-tuning Qwen3-32B with RLPF on PerfCodeBench raises correct-and-runnable solutions from 11.1% to 54.6% and improves relative efficiency from 8.1% to 38.6%. The trained model becomes competitive with stronger open-weight systems, and its optimization behavior transfers modestly to EffiBench-X. Additional studies show that model-generated references provide useful but weaker supervision, and that the full composite reward is more reliable than correctness-only or runtime-only baselines. These results suggest that code agents can be trained not only to pass tests, but also to optimize the programs they write.

Looped language models increase effective depth by repeatedly applying a shared block of layers, but existing large-scale recipes require multi-stage training over trillions of tokens, while the benefits of recurrence remain difficult to separate from differences in data and training. In this work, we establish practical training recipes for looped language models, with three main results. (1) We develop a compute-efficient from-scratch pipeline that reduces the training budget from 7.7T tokens in Ouro to 310B tokens while retaining strong reasoning performance. Pretraining followed by high-quality mid-training, together with learning-rate warmup and stronger exit-gate regularization, enables stable recurrent training without prior multi-stage schedules. (2) Under controlled comparisons, our 1.4B LoopLM outperforms a parameter-matched dense model trained on the same data and token budget on all 12 evaluated benchmarks, including +14 points on GSM8K, +10 on MATH, and +22 on DROP. At matched inference compute, it approaches a 3.9B dense model on mathematical reasoning and reading comprehension while using only 36\% as many parameters. (3) We introduce a minimal recipe for converting pretrained dense models into looped ones: a single learned input-mixing scalar and a smoothed exit loss, with no step-specific parameters. Applied to Qwen3-1.7B-Base, Looped Qwen improves over an identically continued dense baseline on every evaluated benchmark across two data regimes, with statistically clear gains on GSM8K, MATH, and MMLU-Pro on the curated mixture. Together, these results make looped language models substantially cheaper to train from scratch and practical to introduce into existing pretrained checkpoints, while isolating the gains due to recurrence itself.

Repository-level code completion aims to generate code for unfinished code snippets within the context of a specified repository. Existing approaches mainly rely on retrieval-augmented generation strategies due to limitations in input sequence length. However, traditional lexical-based retrieval methods like BM25 struggle to capture code semantics, while model-based retrieval methods face challenges due to the lack of labeled data for training. Therefore, we propose RLCoder, a novel reinforcement learning framework, which can enable the retriever to learn to retrieve useful content for code completion without the need for labeled data. Specifically, we iteratively evaluate the usefulness of retrieved content based on the perplexity of the target code when provided with the retrieved content as additional context, and provide feedback to update the retriever parameters. This iterative process enables the retriever to learn from its successes and failures, gradually improving its ability to retrieve relevant and high-quality content. Considering that not all situations require information beyond code files and not all retrieved context is helpful for generation, we also introduce a stop signal mechanism, allowing the retriever to decide when to retrieve and which candidates to retain autonomously. Extensive experimental results demonstrate that RLCoder consistently outperforms state-of-the-art methods on CrossCodeEval and RepoEval, achieving 12.2% EM improvement over previous methods. Moreover, experiments show that our framework can generalize across different programming languages and further improve previous methods like RepoCoder. We provide the code and data at https://github.com/DeepSoftwareAnalytics/RLCoder.

Looped computation shows promise in improving the reasoning-oriented performance of LLMs by scaling test-time compute. However, existing approaches typically require either training recurrent models from scratch or applying disruptive retrofits, which involve substantial computational costs and may compromise pretrained capabilities. To address these limitations, we introduce Looped Depth Up-Scaling (LoopUS), a post-training framework that converts a standard pretrained LLM into a looped architecture. As a key technical contribution, LoopUS recasts the pretrained LLM into an encoder, a looped reasoning block, and a decoder. It operationalizes this latent-refinement architecture through four core components: (1) block decomposition, guided by staged representation dynamics; (2) an input-dependent selective gate to mitigate hidden-state drift; (3) random deep supervision for memory-efficient learning over long recursive horizons; and (4) a confidence head for adaptive early exiting. Collectively, these mechanisms transform a standard non-looped model into a looped form while stabilizing it against both computational bottlenecks and representation collapse. Through stable latent looping, LoopUS improves reasoning-oriented performance without extending the generated traces or requiring recurrent training from scratch. For more details, see https://thrillcrazyer.github.io/LoopUS

Despite the success of test-time scaling, Large Reasoning Models (LRMs) frequently encounter repetitive loops that lead to computational waste and inference failure. In this paper, we identify a distinct failure mode termed Circular Reasoning. Unlike traditional model degeneration, this phenomenon manifests as a self-reinforcing trap where generated content acts as a logical premise for its own recurrence, compelling the reiteration of preceding text. To systematically analyze this phenomenon, we introduce LoopBench, a dataset designed to capture two distinct loop typologies: numerical loops and statement loops. Mechanistically, we characterize circular reasoning as a state collapse exhibiting distinct boundaries, where semantic repetition precedes textual repetition. We reveal that reasoning impasses trigger the loop onset, which subsequently persists as an inescapable cycle driven by a self-reinforcing V-shaped attention mechanism. Guided by these findings, we employ the Cumulative Sum (CUSUM) algorithm to capture these precursors for early loop prediction. Experiments across diverse LRMs validate its accuracy and elucidate the stability of long-chain reasoning.

Automated Program Repair (APR) is a task to automatically generate patches for the buggy code. However, most research focuses on generating correct patches while ignoring the consistency between the fixed code and the original buggy code. How to conduct adaptive bug fixing and generate patches with minimal modifications have seldom been investigated. To bridge this gap, we first introduce a novel task, namely AdaPR (Adaptive Program Repair). We then propose a two-stage approach AdaPatcher (Adaptive Patch Generator) to enhance program repair while maintaining the consistency. In the first stage, we utilize a Bug Locator with self-debug learning to accurately pinpoint bug locations. In the second stage, we train a Program Modifier to ensure consistency between the post-modified fixed code and the pre-modified buggy code. The Program Modifier is enhanced with a location-aware repair learning strategy to generate patches based on identified buggy lines, a hybrid training strategy for selective reference and an adaptive preference learning to prioritize fewer changes. The experimental results show that our approach outperforms a set of baselines by a large margin, validating the effectiveness of our two-stage framework for the newly proposed AdaPR task.

Block diffusion accelerates speculative decoding by drafting multiple tokens in one forward pass. However, each position predicts a marginal distribution without observing earlier proposed tokens, limiting draft quality and acceptance length. We identify a concrete failure, the repetition trap, in which neighboring positions produce redundant copies of the same token. We explain this tendency theoretically and empirically examine its association with shorter accepted drafts. Recent methods refine marginal predictions with an additional causal head or a separately trained drafter, increasing parameter storage and introducing separate training objectives. We instead propose D-Loop, which introduces intra-block causal conditioning within the original diffusion drafter without additional model components. Inspired by semi-autoregressive generation and parameter sharing, D-Loop reuses the same backbone across looped passes. The first pass proposes a block, and the second conditions on a selected prefix to regenerate the suffix in parallel. A complementary prefix--suffix objective trains the shared drafter for both anchor-only prefix prediction and prefix-conditioned suffix prediction. Across eight math, code, and chat benchmarks, D-Loop can beat DFlash and DSpark on Qwen3-4B and Qwen3-8B with obvious gains.

Language models are increasingly used in scientific discovery to generate hypotheses, propose candidate solutions, implement systems, and iteratively refine them. At the core of these trial-and-error loops lies evaluation: the process of obtaining feedback on candidate solutions via verifiers, simulators, or task-specific scoring functions. While prior work has highlighted the importance of evaluation, it has not explicitly formulated the problem of how evaluation-driven discovery loops can be scaled up in a principled and effective manner to push the boundaries of scientific discovery, a problem this paper seeks to address. We introduce Simple Test-time Evaluation-driven Scaling (SimpleTES), a general framework that strategically combines parallel exploration, feedback-driven refinement, and local selection, revealing substantial gains unlocked by scaling evaluation-driven discovery loops along the right dimensions. Across 21 scientific problems spanning six domains, SimpleTES discovers state-of-the-art solutions using gpt-oss models, consistently outperforming both frontier-model baselines and sophisticated optimization pipelines. Particularly, we sped up the widely used LASSO algorithm by over 2x, designed quantum circuit routing policies that reduce gate overhead by 24.5%, and discovered new Erdos minimum overlap constructions that surpass the best-known results. Beyond novel discoveries, SimpleTES produces trajectory-level histories that naturally supervise feedback-driven learning. When post-trained on successful trajectories, models not only improve efficiency on seen problems but also generalize to unseen problems, discovering solutions that base models fail to uncover. Together, our results establish effective evaluation-driven loop scaling as a central axis for advancing LLM-driven scientific discovery, and provide a simple yet practical framework for realizing these gains.

With the advent of neural language models, the performance of code generation has been significantly boosted. However, the problem of repetitions during the generation process continues to linger. Previous work has primarily focused on content repetition, which is merely a fraction of the broader repetition problem in code generation. A more prevalent and challenging problem is structural repetition. In structural repetition, the repeated code appears in various patterns but possesses a fixed structure, which can be inherently reflected in grammar. In this paper, we formally define structural repetition and propose an efficient decoding approach called RPG, which stands for Repetition Penalization based on Grammar, to alleviate the repetition problems in code generation for LLMs. Specifically, RPG first leverages grammar rules to identify repetition problems during code generation, and then strategically decays the likelihood of critical tokens that contribute to repetitions, thereby mitigating them in code generation. To facilitate this study, we construct a new dataset CodeRepetEval to comprehensively evaluate approaches for mitigating the repetition problems in code generation. Extensive experimental results demonstrate that RPG substantially outperforms the best-performing baselines on CodeRepetEval dataset as well as HumanEval and MBPP benchmarks, effectively reducing repetitions and enhancing the quality of generated code.

Diffusion language models enable parallel token generation through block-wise decoding, but their irreversible commitments can lead to stagnation, where the reverse diffusion process fails to make further progress under a suboptimal context.We propose Reversible Diffusion Decoding (RDD), a decoding framework that introduces reversibility into block-wise diffusion generation. RDD detects stagnation as a state-dependent failure of the reverse process and enables efficient backtracking to earlier blocks without recomputation via cached model states. To avoid repeated failure trajectories, RDD applies confidence-guided re-masking to selectively reinitialize uncertain tokens while preserving reliable context.This reversible formulation allows decoding to recover from early commitment errors while maintaining the parallel efficiency of diffusion-based generation. Experiments show that RDD improves generation robustness and quality over baselines with minimal computational overhead.

Current embodied models do not respond to their own failures, although what just went wrong could inform a small adjustment on the next attempt, the kind of reflection behind the gains of thinking in language models. We test whether they can repair a known error, which requires producing a correction and judging whether it is right. Stopped at a failure and allowed to retry, they seldom repair it through their own randomness or from a language description of the error, and best-of-N selection cannot pick the successful candidate after a failure. We attribute this to training only on successful demonstrations and to inputs too narrow to show what went wrong, and conclude that reflection must come from a vision-language model (VLM), which takes in far more information, such as the episode history and text, and is more general. Prior VLM-led work has the VLM plan every step and invoke the embodied model as a tool, placing the VLM on the critical path. We propose Spotter, which reverses the roles: the embodied model leads and executes continuously, while the VLM runs in parallel, monitors through a lightweight local screener, intervenes only when an error is detected, reflects on and corrects it, and returns control. We run Spotter with Qwen and with GPT as the VLM, and both improve the embodied models; with GPT, Spotter improves Cosmos Policy and π_{0.5} by 5.6 and 7.5 percentage points on RoboCasa, and raises π_{0.5} from 47.2% to 57.0% on the Hard setting of RoboTwin 2.0 and from 53% to 83% on a real robot. Because the VLM steps in only when an error is confirmed, a successful episode with Qwen takes only 13 to 16 s longer than with the embodied model alone and about 70% less time than with a VLM-led baseline using the same model. Our code is available at https://github.com/zqc3117/Spotter.

Industrial recommender systems face the challenge of operating in non-stationary environments, where data distribution shifts arise from evolving user behaviors over time. To tackle this challenge, a common approach is to periodically re-train or incrementally update deployed deep models with newly observed data, resulting in a continual training process. However, the conventional learning paradigm of neural networks relies on iterative gradient-based updates with a small learning rate, making it slow for large recommendation models to adapt. In this paper, we introduce ReLoop2, a self-correcting learning loop that facilitates fast model adaptation in online recommender systems through responsive error compensation. Inspired by the slow-fast complementary learning system observed in human brains, we propose an error memory module that directly stores error samples from incoming data streams. These stored samples are subsequently leveraged to compensate for model prediction errors during testing, particularly under distribution shifts. The error memory module is designed with fast access capabilities and undergoes continual refreshing with newly observed data samples during the model serving phase to support fast model adaptation. We evaluate the effectiveness of ReLoop2 on three open benchmark datasets as well as a real-world production dataset. The results demonstrate the potential of ReLoop2 in enhancing the responsiveness and adaptiveness of recommender systems operating in non-stationary environments.

LLM agents enhanced by tree search algorithms have yielded notable performances in code generation. However, current search algorithms in this domain suffer from low search quality due to several reasons: 1) Ineffective design of the search space for the high-reasoning demands of code generation tasks, 2) Inadequate integration of code feedback with the search algorithm, and 3) Poor handling of negative feedback during the search, leading to reduced search efficiency and quality. To address these challenges, we propose to search for the reasoning process of the code and use the detailed feedback of code execution to refine erroneous thoughts during the search. In this paper, we introduce RethinkMCTS, which employs the Monte Carlo Tree Search (MCTS) algorithm to conduct thought-level searches before generating code, thereby exploring a wider range of strategies. More importantly, we construct verbal feedback from fine-grained code execution feedback to refine erroneous thoughts during the search. This ensures that the search progresses along the correct reasoning paths, thus improving the overall search quality of the tree by leveraging execution feedback. Through extensive experiments, we demonstrate that RethinkMCTS outperforms previous search-based and feedback-based code generation baselines. On the HumanEval dataset, it improves the pass@1 of GPT-3.5-turbo from 70.12 to 89.02 and GPT-4o-mini from 87.20 to 94.51. It effectively conducts more thorough exploration through thought-level searches and enhances the search quality of the entire tree by incorporating rethink operation.

Automatic program repair (APR) is crucial to reduce manual debugging efforts for developers and improve software reliability. While conventional search-based techniques typically rely on heuristic rules or a redundancy assumption to mine fix patterns, recent years have witnessed the surge of deep learning (DL) based approaches to automate the program repair process in a data-driven manner. However, their performance is often limited by a fixed set of parameters to model the highly complex search space of APR. To ease such burden on the parametric models, in this work, we propose a novel Retrieval-Augmented Patch Generation framework (RAP-Gen) by explicitly leveraging relevant fix patterns retrieved from a codebase of previous bug-fix pairs. Specifically, we build a hybrid patch retriever to account for both lexical and semantic matching based on the raw source code in a language-agnostic manner, which does not rely on any code-specific features. In addition, we adapt a code-aware language model CodeT5 as our foundation model to facilitate both patch retrieval and generation tasks in a unified manner. We adopt a stage-wise approach where the patch retriever first retrieves a relevant external bug-fix pair to augment the buggy input for the CodeT5 patch generator, which synthesizes a ranked list of repair patch candidates. Notably, RAP-Gen is a generic APR framework that can flexibly integrate different patch retrievers and generators to repair various types of bugs. We thoroughly evaluate RAP-Gen on three benchmarks in two programming languages, including the TFix benchmark in JavaScript, and Code Refinement and Defects4J benchmarks in Java, where the bug localization information may or may not be provided. Experimental results show that RAP-Gen significantly outperforms previous state-of-the-art approaches on all benchmarks, e.g., repairing 15 more bugs on 818 Defects4J bugs.

Code generation with Large Language Models (LLMs) has helped to increase software developer productivity in coding tasks, but has yet to have significant impact on the tasks of software developers that surround this code. In particular, the challenge of infrastructure management remains an open question. We investigate the ability of an LLM agent to construct infrastructure using the Infrastructure as Code (IaC) paradigm. We particularly investigate the use of a feedback loop that returns errors and warnings on the generated IaC to allow the LLM agent to improve the code. We find that, for each iteration of the loop, its effectiveness decreases exponentially until it plateaus at a certain point and becomes ineffective.

Reinforcement Learning (RL) with unit test feedback has enhanced large language models (LLMs) code generation, but relies on sparse rewards provided only after complete code evaluation, limiting learning efficiency and incremental improvements. When generated code fails all unit tests, no learning signal is received, hindering progress on complex tasks. To address this, we propose a Process Reward Model (PRM) that delivers dense, line-level feedback on code correctness during generation, mimicking human code refinement and providing immediate guidance. We explore various strategies for training PRMs and integrating them into the RL framework, finding that using PRMs both as dense rewards and for value function initialization significantly boosts performance. Our approach increases our in-house LLM's pass rate from 28.2% to 29.8% on LiveCodeBench and from 31.8% to 35.8% on our internal benchmark. Our experimental results highlight the effectiveness of PRMs in enhancing RL-driven code generation, especially for long-horizon scenarios.

An unsuccessful LLM agent rollout contains more information than its final reward: the observations available to the agent, the actions it chose, and the environment's responses. Reusing this experience for learning requires identifying a decision to revise and testing a concrete alternative. We introduce the Agent Error Dataset (AED), comprising 50,228 error-diagnosis pairs from 9,961 source tasks across 33 environments, 19 harness families, and 23 policy models in text-based agent systems. We retain source traces and execution metadata to support cross-setting failure analysis and re-diagnosis without repeating the original rollout. Our five-stage Agentic Error-to-Training (AET) pipeline collects natural failures, generates diagnoses and proposed corrections, and checks them against recorded evidence. Where replay is supported, we compare corrections with original-action retries from the same checkpoint under matched execution settings. We then construct separate training views for diagnosis and actor recovery. Across 3,062 matched replay pairs, first-proposal corrections raise verifier pass rates from 18.4% to 51.1%, a gain of 32.7 percentage points. Using a separately frozen diagnosis release, full-diagnosis fine-tuning on 1,656 source tasks raises Qwen3-8B's exact-step agreement with internal teacher labels from 47.2% to 63.6%, averaged over three seeds on a 943-case holdout. The strongest prompted reference in this comparison scores 54.7%, and mean agreement improves at each of four increasing training-set sizes. In a single-seed comparison of actor-training recipes, action-only repair training scores 6.67 percentage points higher on WebShop-lite than success-only training.

Loop invariants are fundamental to reasoning about programs with loops. They establish properties about a given loop's behavior. When they additionally are inductive, they become useful for the task of formal verification that seeks to establish strong mathematical guarantees about program's runtime behavior. The inductiveness ensures that the invariants can be checked locally without consulting the entire program, thus are indispensable artifacts in a formal proof of correctness. Finding inductive loop invariants is an undecidable problem, and despite a long history of research towards practical solutions, it remains far from a solved problem. This paper investigates the capabilities of the Large Language Models (LLMs) in offering a new solution towards this old, yet important problem. To that end, we first curate a dataset of verification problems on programs with loops. Next, we design a prompt for exploiting LLMs, obtaining inductive loop invariants, that are checked for correctness using sound symbolic tools. Finally, we explore the effectiveness of using an efficient combination of a symbolic tool and an LLM on our dataset and compare it against a purely symbolic baseline. Our results demonstrate that LLMs can help improve the state-of-the-art in automated program verification.

We introduce self-invoking code generation, a new task designed to evaluate the progressive reasoning and problem-solving capabilities of LLMs. In this task, models are presented with a base problem and a related, more complex problem. They must solve the base problem and then utilize its solution to address the more complex one. This work features three key contributions. First, we propose a general recipe for generating more challenging versions of existing benchmarks, resulting in three new benchmarks: HumanEval Pro, MBPP Pro, and BigCodeBench-Lite Pro, specifically designed to assess LLMs on self-invoking code generation. Second, from the analysis of experimental results over twenty LLMs on our benchmarks, we have two important observations: (i) Most LLMs excel in traditional code generation benchmarks like HumanEval and MBPP, but their performance declines on self-invoking tasks. For example, o1-mini achieves 96.2% pass@1 on HumanEval but only 76.2% on HumanEval Pro. (ii) On self-invoking code generation task, the instruction-tuned models demonstrate only marginal improvements compared to the base models. Third, we disclose the types of failure modes that exist in our evaluation results. All these results underscore the need for further advancements in self-invoking code generation tasks and provide a new direction for future research on enhancing LLMs' code reasoning capabilities.

API misuses often lead to software bugs, crashes, and vulnerabilities. While several API misuse detectors have been proposed, there are no automatic repair tools specifically designed for this purpose. In a recent study, test-suite-based automatic program repair (APR) tools were found to be ineffective in repairing API misuses. Still, since the study focused on non-learning-aided APR tools, it remains unknown whether learning-aided APR tools are capable of fixing API misuses. In recent years, pre-trained language models (PLMs) have succeeded greatly in many natural language processing tasks. There is a rising interest in applying PLMs to APR. However, there has not been any study that investigates the effectiveness of PLMs in repairing API misuse. To fill this gap, we conduct a comprehensive empirical study on 11 learning-aided APR tools, which include 9 of the state-of-the-art general-purpose PLMs and two APR tools. We evaluate these models with an API-misuse repair dataset, consisting of two variants. Our results show that PLMs perform better than the studied APR tools in repairing API misuses. Among the 9 pre-trained models tested, CodeT5 is the best performer in the exact match. We also offer insights and potential exploration directions for future research.

LLM agents can improve across tasks without updating model parameters by storing experience from their own executions in external memory and reusing it to guide later decisions. A central design question is whether to retain only observed trajectories and outcomes or also the rules, summaries, and skills inferred from them. Retaining these abstractions allows agents to reuse strategies without repeatedly deriving them from raw trajectories. However, errors in stored abstractions can propagate to subsequent decisions through retrieval and reuse. They can also shape execution trajectories, which then become the basis for new abstractions that reproduce the original errors. We term this feedback mechanism error reproduction: errors are regenerated through a cycle of abstraction, execution, and re-abstraction, extending their persistence beyond direct reuse of the original faulty knowledge. We propose Anti-Persistence, a memory design that accumulates trajectories and outcomes while reconstructing task-specific guidance on demand. An adaptive selector uses prior outcomes to decide whether and how to synthesize guidance, which is discarded after execution. This prevents its direct reuse as a stored object, although indirect feedback through retained trajectories remains possible. Across different benchmarks and backbones, Anti-Persistence achieves higher overall held-out success and the lowest average LLM-call cost among the evaluated memory designs. These results support separating experience accumulation from abstraction persistence in memorybased self-improvement.

We measure how much one extra recurrence is worth to a looped (depth-recurrent) language model, in equivalent unique parameters. From an iso-depth sweep of 116 pretraining runs across recurrence counts r in {1, 2, 4, 8} spanning {sim}50times in training compute, we fit a joint scaling law L = E + A,(N_once + r^φ N_rec)^{-α} + B,D^{-β} and recover a new recurrence-equivalence exponent φ= 0.46. Intuitively, φ tells us whether looping a block r times is equivalent in validation loss to r unique blocks of a non-looped model (full equivalence, φ{=}1) or to a single block run repeatedly with no capacity gain (φ{=}0). Our φ= 0.46 sits in between, so each additional recurrence predictably increases validation loss at matched training compute. For example, at r{=}4 a 410M looped model performs on par with a 580M non-looped model, but incurs the training cost of a 1B non-looped one. We demonstrate the utility of φ as a measurement tool on two probes. Truncated backpropagation lowers φ to 0.38, indicating that the loop mechanism is poorly trained under truncation, even though validation loss decreases. Conversely, hyperconnections raise φ to 0.65, a genuine capacity gain. Our method applies to any looped LM and separates true loop improvements from token-budget gains.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

Nowadays transformer-based Large Language Models (LLM) for code generation tasks usually apply sampling and filtering pipelines. Due to the sparse reward problem in code generation tasks caused by one-token incorrectness, transformer-based models will sample redundant programs till they find a correct one, leading to low efficiency. To overcome the challenge, we incorporate Experience Replay (ER) in the fine-tuning phase, where codes and programs produced are stored and will be replayed to give the LLM agent a chance to learn from past experiences. Based on the spirit of ER, we introduce a novel approach called BTP pipeline which consists of three phases: beam search sampling, testing phase, and prioritized experience replay phase. The approach makes use of failed programs collected by code models and replays programs with high Possibility and Pass-rate Prioritized value (P2Value) from the replay buffer to improve efficiency. P2Value comprehensively considers the possibility of transformers' output and pass rate and can make use of the redundant resources caused by the problem that most programs collected by LLMs fail to pass any tests. We empirically apply our approach in several LLMs, demonstrating that it enhances their performance in code generation tasks and surpasses existing baselines.

Synthesizing inductive loop invariants is fundamental to automating program verification. In this work, we observe that Large Language Models (such as gpt-3.5 or gpt-4) are capable of synthesizing loop invariants for a class of programs in a 0-shot setting, yet require several samples to generate the correct invariants. This can lead to a large number of calls to a program verifier to establish an invariant. To address this issue, we propose a {\it re-ranking} approach for the generated results of LLMs. We have designed a ranker that can distinguish between correct inductive invariants and incorrect attempts based on the problem definition. The ranker is optimized as a contrastive ranker. Experimental results demonstrate that this re-ranking mechanism significantly improves the ranking of correct invariants among the generated candidates, leading to a notable reduction in the number of calls to a verifier.

We present SQL Query Engine, an open-source, self-hosted service that translates natural language questions into validated PostgreSQL queries through a two-stage LLM pipeline. The first stage performs automatic schema introspection and SQL generation; a multi-strategy response parser extracts SQL from any LLM output format (JSON, code blocks, or raw text) without requiring structured output APIs. The second stage executes the query against PostgreSQL and, upon failure or empty results, enters an iterative self-healing loop in which the LLM diagnoses the error using full SQLSTATE codes and PostgreSQL diagnostic messages. Two mechanisms prevent regressions: early-accept returns successful queries immediately without LLM re-evaluation, and best-result tracking preserves the best partial result across retries. Schema context is cached per session in Redis, progress events stream via Redis Pub/Sub and SSE, and an OpenAI-compatible /v1/chat/completions endpoint lets existing tools work without modification. All database connections are read-only at the driver level. We evaluate across five LLM backends on a synthetic benchmark (75 questions, three databases) where the self-healing loop yields up to +9.3pp accuracy gains with zero regressions on the best model (Llama 4 Scout 17B, 57.3%), and on BIRD (437 questions, 11 databases migrated from SQLite to PostgreSQL) where the full pipeline reaches 49.0% execution accuracy (GPT-OSS-120B, +4.6pp). Source code: https://github.com/codeadeel/sqlqueryengine.

Query rewrite, which aims to generate more efficient queries by altering a SQL query's structure without changing the query result, has been an important research problem. In order to maintain equivalence between the rewritten query and the original one during rewriting, traditional query rewrite methods always rewrite the queries following certain rewrite rules. However, some problems still remain. Firstly, existing methods of finding the optimal choice or sequence of rewrite rules are still limited and the process always costs a lot of resources. Methods involving discovering new rewrite rules typically require complicated proofs of structural logic or extensive user interactions. Secondly, current query rewrite methods usually rely highly on DBMS cost estimators which are often not accurate. In this paper, we address these problems by proposing a novel method of query rewrite named LLM-R2, adopting a large language model (LLM) to propose possible rewrite rules for a database rewrite system. To further improve the inference ability of LLM in recommending rewrite rules, we train a contrastive model by curriculum to learn query representations and select effective query demonstrations for the LLM. Experimental results have shown that our method can significantly improve the query execution efficiency and outperform the baseline methods. In addition, our method enjoys high robustness across different datasets.

We consider the task of mapping pseudocode to long programs that are functionally correct. Given test cases as a mechanism to validate programs, we search over the space of possible translations of the pseudocode to find a program that passes the validation. However, without proper credit assignment to localize the sources of program failures, it is difficult to guide search toward more promising programs. We propose to perform credit assignment based on signals from compilation errors, which constitute 88.7% of program failures. Concretely, we treat the translation of each pseudocode line as a discrete portion of the program, and whenever a synthesized program fails to compile, an error localization method tries to identify the portion of the program responsible for the failure. We then focus search over alternative translations of the pseudocode for those portions. For evaluation, we collected the SPoC dataset (Search-based Pseudocode to Code) containing 18,356 programs with human-authored pseudocode and test cases. Under a budget of 100 program compilations, performing search improves the synthesis success rate over using the top-one translation of the pseudocode from 25.6% to 44.7%.

LLM unlearning has emerged as a cost-effective alternative to full retraining for removing hazardous knowledge from pretrained models while preserving general utility. Recent RL-based methods such as RULE reformulate unlearning as learning a refusal behavior, but their on-policy optimization repeatedly samples from the same forget and retain/boundary prompts throughout training. We identify a critical inefficiency in this process: easy cases quickly converge and provide little useful gradient signal, while hard cases near the forget/retain boundary continue to produce low-reward rollouts that are discarded after a single use. To address this issue, we propose ReRULE, an off-policy replay enhancement for reinforcement unlearning. ReRULE stores low-reward hard-case rollout groups in a replay buffer during early GRPO training and reuses them in later stages through importance-sampled off-policy updates, redirecting computation toward boundary cases that still require learning. Theoretically, we show that ReRULE yields a tighter hard-case convergence bound than pure on-policy RULE. Empirically, ReRULE improves MUSE-Books Retain Quality from 46.3 to 56.2 while adding only 5--11% training time across benchmarks. Its limited improvement on the simpler TOFU setting further supports the intended conditional behavior: replay is most beneficial when the hard/easy disparity is pronounced.

Looped Language Models (LoopLMs) perform "latent reasoning" by recursively refining internal latent representations with shared weights, offering a more effective alternative to explicit verbal reasoning. Despite their effectiveness, we find that LoopLMs remain prone to loop instability: unstable refinement across iterations can produce localized uncertain "hard" tokens associated with reasoning errors. To address this, we propose LoopCD, loop-wise contrastive decoding that enhances the reasoning performance of LoopLMs by intervening on these tokens at inference time. Specifically, we exploit the internal dynamics of LoopLMs and contrast the logits from earlier iterations with logits from the last refined iteration to form the final sampling distribution. We find that this strategy is highly efficient, introducing only negligible inference overhead and requiring no additional training, while effectively improving reasoning performance by naturally refining reasoning-critical hard tokens. Extensive experiments show that our method improves the performance of recent representative LoopLMs across various reasoning tasks.

APR (Automated Program Repair) aims to automatically locate program defects, generate patches and validate the repairs. Existing techniques for APR are often combined with LLMs (Large Language Models), which leverages the code-related knowledge of LLMs to improve repair effectiveness. Current LLM-based APR methods typically utilize test cases only during the inference stage, adopting an iterative approach that performs repair first and validates it through test execution afterward. This conventional paradigm neglects two important aspects: the potential contribution of test cases in the training phase, and the possibility of leveraging testing prior to repair. To address this, we propose Repair-R1, which introduces test cases into the model's training phase and shifts test generation to precede repair. The model is required to first generate discriminative test cases that can distinguish defective behaviors, and then perform repair based on these tests. This enables the model to better locate defects and understand the underlying causes of defects, thereby improving repair effectiveness. We implement Repair-R1 with three different backbone models, using RL (reinforcement learning) to co-optimize test generation and bug repair. Experimental results on four widely adopted benchmarks demonstrate the superiority of Repair-R1. Specially, compared to vanilla models, Repair-R1 improves repair success rate by 2.68\% to 48.29\%, test generation success rate by 16.38\% to 53.28\%, and test coverage by 0.78\% to 53.96\%. We publish the code and weights at https://github.com/Tomsawyerhu/APR-RL and https://huggingface.co/tomhu/Qwen3-4B-RL-5000-step.

Looped language models separate computational depth from parameter count by repeatedly applying the same transformer block. Adapting these models requires a shared update that remains effective as hidden states evolve throughout the recurrent computation. Our empirical analysis reveals a pronounced late-loop bias in standard low-rank adaptation (LoRA): the shared update is more effective at later loop positions. This imbalance motivates training shared updates under varying combinations of their applications. Randomly omitting adapter applications alone, however, does not improve task performance; it reduces expected update strength during training while leaving inference unchanged. We introduce Loop Dropout, which couples stochastic masking of adapter applications with inverse-survival rescaling to preserve expected update strength and promote effective adaptation across loops. Extensive experiments demonstrate improved mathematical reasoning across model sizes, adapter ranks and training recipes, with benefits extending to general instruction tuning and code generation. Loop Dropout outperforms existing LoRA variants and adapter regularizers, while further analysis shows stronger early-loop adaptation. Every backbone loop remains active, and inference applies the adapter at all loops using standard LoRA without additional trainable parameters or inference computation.

Advanced compiler technology is crucial for enabling machine learning applications to run on novel hardware, but traditional compilers fail to deliver performance, popular auto-tuners have long search times and expert-optimized libraries introduce unsustainable costs. To address this, we developed LoopTune, a deep reinforcement learning compiler that optimizes tensor computations in deep learning models for the CPU. LoopTune optimizes tensor traversal order while using the ultra-fast lightweight code generator LoopNest to perform hardware-specific optimizations. With a novel graph-based representation and action space, LoopTune speeds up LoopNest by 3.2x, generating an order of magnitude faster code than TVM, 2.8x faster than MetaSchedule, and 1.08x faster than AutoTVM, consistently performing at the level of the hand-tuned library Numpy. Moreover, LoopTune tunes code in order of seconds.

Looped transformers and Mixture-of-Experts (MoE) offer complementary routes to efficient scaling: recurrence increases computational depth at fixed parameters, while MoE sparsity expands total capacity at fixed active compute. Yet existing scaling laws model recurrence or sparsity in isolation. In this work, we introduce Loop Scaling Laws, the first scaling law to jointly model recurrence and sparsity alongside model size and data. At its core is a bounded, sparsity-conditional recurrence mapping that characterizes the effective-parameter gain from looping and how sparsity raises this gain. The laws predict the held-out loss of looped models more accurately than prior alternatives, and recover the standard dense and MoE scaling laws as special cases. Beyond prediction, the fitted laws provide a principled foundation for designing looped MoE models under compute and memory constraints. Downstream evaluations further demonstrate the complementary benefits of the two axes: sparsity delivers ~3x active-parameter efficiency, recurrence yields ~2x total-parameter efficiency on reasoning, and joint scaling further advances the performance frontier. As a practical extension, we show these gains hold at trillion-token scale: at matched training compute, a looped MoE with law-derived recurrence matches a ~2x larger non-looped MoE on the reasoning benchmarks, while enabling test-time scaling through recurrence.

Traditional fixed-depth architectures scale quality by increasing training FLOPs, typically through increased parameterization, at the expense of a higher memory footprint, or data. A potential alternative is looped architectures, which instead increase FLOPs by sending activations through a block of layers in a loop. While promising, existing recipes for training looped architectures can be unstable, suffering from residual explosion and loss spikes. We address these challenges by recasting looping as a nonlinear time-variant dynamical system over the residual stream. Via a linear approximation to this system, we find that instability occurs in existing looped architectures as a result of large spectral norms in their injection parameters. To address these instability issues, we propose Parcae, a novel stable, looped architecture that constrains the spectral norm of the injection parameters via discretization of a negative diagonal parameterization. As a result, Parcae achieves up to 6.3% lower validation perplexity over prior large-scale looped models. Using our stable looped architecture, we investigate the scaling properties of looping as a medium to improve quality by increasing FLOPs in training and test-time. For training, we derive predictable power laws to scale FLOPs while keeping parameter count fixed. Our initial scaling laws suggest that looping and data should be increased in tandem, given a fixed FLOP budget. At test-time, we find that Parcae can use looping to scale compute, following a predictable, saturating exponential decay. When scaled up to 1.3B parameters, we find that Parcae improves CORE and Core-Extended quality by 2.99 and 1.18 points when compared to strong Transformer baselines under a fixed parameter and data budget, achieving a relative quality of up to 87.5% a Transformer twice the size.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

Looped Language Models (LoopLMs) enable efficient latent reasoning through depth recurrence, yet exhibit unreliable test-time scaling behavior: performance often peaks at a certain iteration depth and then collapses with further recurrence. Through latent dynamics analysis, we find an inherent trade-off between stability and effectiveness in existing architectures and strategies. By conceptualizing reasoning as uncertainty reduction, we propose that convergence toward stable fixed points while preserving effectiveness represents a promising way. To this end, we propose STARS (STAbility-driven Recurrent Scaling), a training framework that constrains latent states to approach asymptotically stable fixed points. This is realized via efficient Jacobian Spectral Radius Regularization with random loop sampling, enabling STARS to maximize effectiveness while ensuring rigorous stability. Experiments on arithmetic tasks show that STARS achieves reliable test-time scaling, and on complex mathematical reasoning it substantially mitigates performance degradation as recurrence depth increases while also improving peak performance.

Context: Bugs in code are inevitable and can lead to severe consequences, ranging from security vulnerabilities to operational failures. Debugging software remains challenging despite advances in testing and verification, often requiring extensive manual effort. Learning-based automated program repair (APR) has shown promise in reducing the time, effort, and cost of manually fixing bugs. However, existing techniques face several challenges, including language-dependent strategies, limited bug context utilization, and difficulties in handling bugs that span multiple locations in the code. Objective: This paper introduces MultiMend, a learning-based APR approach designed to improve repair performance on multiple programming languages with language-independent context augmentation and multi-hunk patch generation. Method: MultiMend fine-tunes a pre-trained encoder-decoder transformer model (CodeT5) to generate bug-fixing patches. It embeds source code lines and applies retrieval-augmented generation to augment the buggy context with relevant lines during patch generation. The approach systematically constructs patches for multi-hunk bugs to reduce the needed patch validations. We evaluate MultiMend on four benchmarks with four programming languages and compare it with state-of-the-art methods. Results: Experimental results show that MultiMend achieves competitive effectiveness and efficiency against compared tools. Across all benchmarks, MultiMend fixes 2,077 bugs, of which 1,455 are identical to the developer's patch, and 106 are for multi-hunk bugs. Both context augmentation and multi-hunk patch generation positively contribute to the results. Conclusion: MultiMend shows promising performance across benchmarks. The findings highlight its applicability to real-world software maintenance and its potential to reduce manual debugging efforts.

AI agents are beginning to automate research and development across the AI stack, from improving training efficiency to optimizing inference. A natural next step is to improve the research efficiency of the agents themselves. When an AI research agent's own code is the object of optimization, each accepted rewrite becomes the agent that the next round edits. We refer to this loop as recursive self-improvement. Its significance lies in a long-standing trend, in which increased cumulative spending on R&D yields diminishing returns. Sustained self-improvement offers a way to counter this trend. We present AIDE^2, a system that implements this loop for a frontier AI research agent. It proposes changes to its own code, benchmarks modified versions of itself on a suite of AI R&D tasks, and keeps the changes that perform best on hidden evaluations. In an autonomous 8-day run, AIDE^2 discovered seven successive improvements, ranging from a new search policy to memory mechanisms that compress and manage the agent's growing context. These gains generalize to four held-out benchmarks spanning machine learning engineering, heuristic algorithm engineering, and physics-based weather forecasting, the last of which is out of distribution from the selection tasks. On all four, the strongest discovered agent matches or exceeds a human-engineered production research agent that ranks among the strongest on FML-Bench. On a separate held-out task family, the discovered agents also exhibit reduced reward hacking, a property the loop never explicitly optimized for: the rate falls from 55% to 32% during the run, 7 percentage points below the human-engineered agent. Together, these results show that an AI research agent can improve its own research efficiency through recursive self-improvement, and that these gains transfer to tasks and domains the loop never encountered.

Automatic program repair seeks to generate correct code from buggy programs, with most approaches searching the correct program in a discrete, symbolic space of source code tokens. This symbolic search is fundamentally limited by its inability to directly reason about program behavior. We introduce Gradient-Based Program Repair (GBPR), a new paradigm that reframes program repair as continuous optimization in a differentiable numerical program space. Our core insight is to compile symbolic programs into differentiable numerical representations, enabling search in the numerical program space directly guided by program behavior. To evaluate GBPR, we present RaspBugs, a new benchmark of 1,466 buggy symbolic RASP programs and their respective numerical representations. Our experiments demonstrate that GBPR can effectively repair buggy symbolic programs by gradient-based optimization in the numerical program space, with convincing repair trajectories. To our knowledge, we are the first to state program repair as continuous optimization in a numerical program space. Our work establishes a new direction for program repair research, bridging two rich worlds: continuous optimization and program behavior.

Tool-using LLM agents face a reliability-cost tradeoff: routing every decision through the LLM improves correctness but incurs high latency and inference cost, while pre-coded workflow graphs reduce cost but become brittle under unanticipated compound tool failures. We present Self-Healing Router, a fault-tolerant orchestration architecture that treats most agent control-flow decisions as routing rather than reasoning. The system combines (i) parallel health monitors that assign priority scores to runtime conditions such as tool outages and risk signals, and (ii) a cost-weighted tool graph where Dijkstra's algorithm performs deterministic shortest-path routing. When a tool fails mid-execution, its edges are reweighted to infinity and the path is recomputed -- yielding automatic recovery without invoking the LLM. The LLM is reserved exclusively for cases where no feasible path exists, enabling goal demotion or escalation. Prior graph-based tool-use systems (ControlLLM, ToolNet, NaviAgent) focus on tool selection and planning; our contribution is runtime fault tolerance with deterministic recovery and binary observability -- every failure is either a logged reroute or an explicit escalation, never a silent skip. Across 19 scenarios spanning three graph topologies (linear pipeline, dependency DAG, parallel fan-out), Self-Healing Router matches ReAct's correctness while reducing control-plane LLM calls by 93% (9 vs 123 aggregate) and eliminating the silent-failure cases observed in a well-engineered static workflow baseline under compound failures.

Prediction is an appealing objective for self-supervised learning of behavioral skills, particularly for autonomous robots. However, effectively utilizing predictive models for control, especially with raw image inputs, poses a number of major challenges. How should the predictions be used? What happens when they are inaccurate? In this paper, we tackle these questions by proposing a method for learning robotic skills from raw image observations, using only autonomously collected experience. We show that even an imperfect model can complete complex tasks if it can continuously retry, but this requires the model to not lose track of the objective (e.g., the object of interest). To enable a robot to continuously retry a task, we devise a self-supervised algorithm for learning image registration, which can keep track of objects of interest for the duration of the trial. We demonstrate that this idea can be combined with a video-prediction based controller to enable complex behaviors to be learned from scratch using only raw visual inputs, including grasping, repositioning objects, and non-prehensile manipulation. Our real-world experiments demonstrate that a model trained with 160 robot hours of autonomously collected, unlabeled data is able to successfully perform complex manipulation tasks with a wide range of objects not seen during training.

Turning a research idea into a complete paper requires more than text generation: the system must retrieve literature, design and execute experiments, revise claims according to evidence, produce publication-ready figures, and maintain consistency across a long generation process. We present Spark-to-Paper, an end-to-end research paper generation system implemented as thirteen composable skills inside an existing coding assistant, without requiring a separate agent platform or orchestration service. Spark-to-Paper separates model-based judgment from deterministic operations that can be directly executed and checked. It further separates experiment planning from reporting, so that required evidence is specified before results are observed and manuscript claims are revised according to measured outcomes. To improve reliability over long research trajectories, the system combines deterministic integrity checks with self-critique and bounds a failure mode we call the Self-Refutation Loop, in which repeated experiments continue to reject the original research objective. Spark-to-Paper also produces editable vector figures through programmatic plotting for experimental results and code-based reconstruction for generated method diagrams. Across eight controlled research topics, Spark-to-Paper achieves 99.5% citation validity and 96.4% figure editability. A controlled ablation increases fabrication detection from 14% for a single-pass draft to 92% with the full integrity and review stack, while adversarial review achieves 74% precision. The full system uses 11.9M tokens, costs $8.1 per manuscript, and requires 3.2 hours on average. These results show that end-to-end research paper generation can be implemented as a lightweight, composable workflow inside existing coding assistants while keeping experimental evidence central to how claims are accepted, revised, or abandoned.

Autonomous GUI agents face two fundamental challenges: early stopping, where agents prematurely declare success without verifiable evidence, and repetitive loops, where agents cycle through the same failing actions without recovery. We present VLAA-GUI, a modular GUI agentic framework built around three integrated components that guide the system on when to Stop, Recover, and Search. First, a mandatory Completeness Verifier enforces UI-observable success criteria and verification at every finish step -- with an agent-level verifier that cross-examines completion claims with decision rules, rejecting those lacking direct visual evidence. Second, a mandatory Loop Breaker provides multi-tier filtering: switching interaction mode after repeated failures, forcing strategy changes after persistent screen-state recurrence, and binding reflection signals to strategy shifts. Third, an on-demand Search Agent searches online for unfamiliar workflows by directly querying a capable LLM with search ability, returning results as plain text. We additionally integrate a Coding Agent for code-intensive actions and a Grounding Agent for precise action grounding, both invoked on demand when required. We evaluate VLAA-GUI across five top-tier backbones, including Opus 4.5, 4.6 and Gemini 3.1 Pro, on two benchmarks with Linux and Windows tasks, achieving top performance on both (77.5% on OSWorld and 61.0% on WindowsAgentArena). Notably, three of the five backbones surpass human performance (72.4%) on OSWorld in a single pass. Ablation studies show that all three proposed components consistently improve a strong backbone, while a weaker backbone benefits more from these tools when the step budget is sufficient. Further analysis also shows that the Loop Breaker nearly halves wasted steps for loop-prone models.

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.